The Mazak VORTEX e-V is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Mazak VORTEX e-V series: four double-column 5-axis machines, CAT No.50 10,000 rpm spindle, X to 91 in (2,311 mm), loads to 15,432 lb (7,000 kg).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Mazak (Japan) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | CAT No.50 |
| Max Table Load Capacity | 5,952 kg |
| Automatic Tool Changer (ATC) | 42 Tool Stations |
| Approx. Machine Weight | 99,206 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Models In Series | 4 models: VORTEX e-1250V/8, VORTEX e-1250V/8S, VORTEX e-1600V/10, VORTEX e-1600V/10S |
| Max Table Load | 5,952 lb (2,700 kg) to 15,432 lb (7,000 kg) |
| Spindle Taper | CAT No.50 |
| Max Spindle Speed | 10,000 rpm |
| Spindle Torque Intermittent | 192 ft-lb (260 Nm) (40% ED) |
| Spindle Torque | 141 ft-lb (191 Nm) continuous |
| Spindle Power Intermittent | 37 kW (50 HP) (40% ED) |
| Spindle Motor Power | 30 kW (40 HP) continuous |
| Tool Capacity | 42 tools |
| Max Tool Diameter | Ø5 in (127 mm) |
| Max Tool Diameter Adjacent Empty | Ø10 in (254 mm) |
| Max Tool Length | 26 in (660 mm) |
| Max Tool Weight | 66 lb (30 kg) |
| X-Axis Travel | 74 in (1,880 mm) to 91 in (2,311 mm) |
| Y-Axis Travel | 49 in (1,245 mm) to 63 in (1,600 mm) |
| Z-Axis Travel | 53 in (1,346 mm) |
| B Axis Range | -30° - +120° |
| Rapid Traverse X | 1,654 ipm (42 m/min) |
| Rapid Traverse Y | 1,654 ipm (42 m/min) |
| Rapid Traverse Z | 1,654 ipm (42 m/min) |
| Machine Height | 173 in (4,394 mm) to 179 in (4,547 mm) |
| Machine Weight | 99,206 lb (44,999 kg) to 127,866 lb (57,999 kg) |
Our best estimate for the Mazak VORTEX e-V is $750,000 - $1,500,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Yamazaki Mazak; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/mazak-vortex-e-v#price; the request is passed to Yamazaki Mazak or an authorised dealer.
Four. Mazak lists the VORTEX e-1250V/8 and the VORTEX e-1600V/10, both with a 2 pallet changer, and the VORTEX e-1250V/8S and VORTEX e-1600V/10S, both single-pallet machines. All four share the CAT No.50, 10,000 rpm spindle, the 42-tool magazine, 53 in (1,346 mm) of Z travel and 1,654 ipm (42 m/min) rapids.
X travel runs from 74 in (1,880 mm) to 91 in (2,311 mm) and Y from 49 in (1,245 mm) to 63 in (1,600 mm). Table load runs from 5,952 lb (2,700 kg) to 15,432 lb (7,000 kg). Those are the lowest and highest figures among the four models, so take the exact travel and load of the model you are quoted from its own table.
Start with the part. Its footprint against the 74 in (1,880 mm) to 91 in (2,311 mm) of X and 49 in (1,245 mm) to 63 in (1,600 mm) of Y picks the size, and its weight with the fixture has to sit inside the load of that model. Then decide on handling: the models without the S have a 2 pallet changer, so the next part can be set up during the cut, while the S models are single-pallet machines.
30 kW (40 HP) continuous and 37 kW (50 HP) at 40% ED, with 141 ft-lb (191 Nm) of continuous torque and 192 ft-lb (260 Nm) at 40% ED. The taper is CAT No.50 and top speed is 10,000 rpm. The same figures apply to all four models.
The e-V is the larger series. The VORTEX i-V covers 56 in (1,422 mm) to 67 in (1,702 mm) of X and carries 3,307 lb (1,500 kg) to 6,614 lb (3,000 kg), against 74 in (1,880 mm) to 91 in (2,311 mm) and 5,952 lb (2,700 kg) to 15,432 lb (7,000 kg) here. Both use a CAT No.50, 10,000 rpm spindle rated 30 kW (40 HP) continuous. The VORTEX i-V has faster rapids at 2,047 ipm (52 m/min) and holds 43 tools against 42.
Mazak's example is a one-level PALLETECH MANUFACTURING CELL, for which a starter set is the required configuration. The system can be expanded as production volume changes, different types of Mazak machine can be integrated into it, and it can be linked with peripheral equipment for long automatic runs. The series runs the MAZATROL SmoothAi control.
