The Nakamura-Tome NEW TW-30 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome NEW TW-30: twin 22/18.5 kW spindles at 3,500 rpm, 335 mm turning diameter, 300 mm turning length, 10 in chuck (15 in optional).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 335 mm (13.2 in) |
| Max Turning Length | 300 mm (11.8 in) |
| Spindle Motor Power | 22 / 18.5 kW |
| Tool Stations | 24 (expandable) |
| Chuck Size | 10 in, (12 in optional), (15 in optional) |
| L R Spindle Speed | 3,500min-1 |
| L Spindle Drive Motor | 22/18.5kW |
| R Spindle Drive Motor | 22/18.5kW |
| Max Bar Capacity | 71 mm (2.8 in) |
| Max Spindle Speed | 3,500 rpm |
| Sub Spindle Power | 22 / 18.5 kW |
| Footprint | 4,975 × 2,606.3 × 2,250 mm (W × D × H) |
Our best estimate for the Nakamura-Tome NEW TW-30 is $300,000 - $450,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Nakamura-Tome; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/nakamura-tome-new-tw-30#price; the request is passed to Nakamura-Tome or an authorised dealer.
Both are listed at 22/18.5kW and 3,500 rpm. Because the right spindle matches the left, the second side of a part can be roughed as hard as the first, which makes it easier to balance the two operations.
A 10 in chuck is standard, and the table lists 12 in and 15 in chucks as options. A larger chuck holds wider parts but usually has a lower speed rating, so check the chuck's limit against the 3,500 rpm spindles.
The table lists 24 tool stations and describes them as expandable. It gives no turret count, Y-axis travel or driven-tool rating, so ask Nakamura-Tome for the tooling layout if parts need milled features.
The SC-300II swings 360 mm (14.2 in), turns up to 635 mm (25 in) long and lists a ±60 mm (±2.36 in) Y-axis, with a 22 / 18.5 kW spindle at 3,500 rpm. The NEW TW-30 is shorter at 300 mm (11.8 in) but offers a 15 in chuck option and a matched 22/18.5kW right spindle.
The footprint is 4,975 × 2,606.3 × 2,250 mm (W × D × H). Allow extra room for a bar feeder if you plan to run 71 mm (2.8 in) bar, and for chip conveyor and service access.
