The Nakamura-Tome SC-300L is an industrial-grade CNC Lathes & Turning Centers powered by the Fanuc 32i-B. a top spindle speed of 3,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome SC-300L listed figures: 12-inch chuck, 620 mm turning diameter, 1,000 mm between centers, 22 kW 3,500 RPM spindle, 12-station turret.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Fanuc 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 3,500 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 9,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Chuck Diameter | 380 mm (15 in) — 12-inch chuck standard |
| Max Turning Diameter | 620 mm (24.4 in) over cross slide |
| Max Turning Length | 1,000 mm (39.4 in) between centers |
| Max Bar Capacity | 91 mm (3.58 in) |
| Max Spindle Speed | 3,500 RPM |
| Spindle Motor Power | 22 kW (30 hp) |
| Spindle Torque | 1,432 Nm (1,056 ft-lb) peak |
| Spindle Nose | A2-8 |
| Turret Stations | 12 stations (live tooling optional) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Z | 24 m/min (945 ipm) |
| CNC Control | Fanuc 32i-B |
| Positioning Accuracy | ±0.004 mm |
| Machine Weight | 9,000 kg (19,842 lb) approx. |
Our best estimate for the Nakamura-Tome SC-300L is $200,000 - $320,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Nakamura-Tome; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/nakamura-tome-sc-300l#price; the request is passed to Nakamura-Tome or an authorised dealer.
The listed figures give 620 mm (24.4 in) of turning diameter over the cross slide and 1,000 mm (39.4 in) between centers, with a 12-inch chuck as standard. Confirm these with Nakamura-Tome before planning work around them.
The table lists 22 kW (30 hp), 1,432 Nm (1,056 ft-lb) of peak torque, a top speed of 3,500 RPM and an A2-8 spindle nose. Bar capacity is listed as 91 mm (3.58 in).
The SC-300IIL lists 360 mm (14.2 in) of turning diameter, 1,135 mm (44.7 in) of turning length, a 22 / 18.5 kW spindle at 3,500 rpm and a 12-station turret. The SC-300L figures on this page differ in swing and length, so treat them as unconfirmed until checked against a specification sheet or the machine itself.
The table gives 9,000 kg (19,842 lb) approx. Check floor loading and rigging access before delivery, and confirm the weight for the specific machine.
