The Nakamura-Tome SC-450L is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 2,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Nakamura-Tome SC-450L: 480 mm turning diameter, 1,520 mm turning length, 30/22 kW 2,500 rpm spindle, 12 in chuck, optional +/- 60 mm Y-axis.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Nakamura-Tome (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 2,500 RPM |
| Spindle Motor Rating | 30.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Chuck Size | 12 in, (15 in~ optional) |
| Max Turning Diameter | 480 mm (18.9 in) |
| Max Turning Length | 1,520 mm (59.8 in) |
| Max Spindle Speed | 2,500 rpm |
| Spindle Motor Power | 30 / 22 kW |
| Milling Spindle Speed | 3,600 rpm |
| Milling Spindle Power | 5.5 / 3.7 kW |
| Y-Axis Travel | +/- 60 mm (+/- 2.36 in) |
| Turret Stations | 12 |
| Machine Height | 2,185 mm (2,531 mm with Y-axis) |
| Distance Between Centers | 1,752 mm (69 in) |
| Spindle Drive Motor | 30/22kW |
| Milling Drive Motor | 5.5/3.7kW |
| Max Bar Capacity | 81 mm (3.2 in) (Ø89 mm option: 89 mm (3.5 in)) |
| Footprint | height:2,184.9mm / 2,531.3mm(Y-axis)(op.) |
Our best estimate for the Nakamura-Tome SC-450L is $320,000 - $430,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Nakamura-Tome; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/nakamura-tome-sc-450l#price; the request is passed to Nakamura-Tome or an authorised dealer.
Up to 480 mm (18.9 in) in diameter and 1,520 mm (59.8 in) long, with 1,752 mm (69 in) between centers. The standard chuck is 12 in, and chucks of 15 in and larger are listed as an option.
No. The table marks the Y-axis as an option. When fitted it gives +/- 60 mm (+/- 2.36 in) of travel and raises the machine height from 2,185 mm to 2,531 mm, which matters in bays with low crane rails.
The SC-300IIL turns up to 360 mm (14.2 in) in diameter and 1,135 mm (44.7 in) long, with a 22 / 18.5 kW spindle at 3,500 rpm. The SC-450L goes to 480 mm (18.9 in) and 1,520 mm (59.8 in) on a 30 / 22 kW spindle, with a lower 2,500 rpm top speed.
Driven tools are rated 5.5 / 3.7 kW at up to 3,600 rpm on a 12-station turret, with +/- 60 mm (+/- 2.36 in) of Y when the optional Y-axis is fitted. That covers drilling, tapping, keyways and flats on large turned parts.
81 mm (3.2 in) as standard, and 89 mm (3.5 in) with the Ø89 mm option. On a machine this size many parts will be chucked blanks or forgings, but the larger bore helps for long bar-fed shafts.
