The Sodick AG400LH is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN (Linear iQ) control. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG400LH wire EDM, an older model: 400 x 300 mm X/Y with a listed 420 mm Z, 680 x 500 mm table, 800 kg part weight, 5,200 kg machine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN (Linear iQ) control |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 680 x 500 mm |
| Approx. Machine Weight | 5,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Size | 680 x 500 mm |
| X-Axis Travel | 400 mm |
| Y-Axis Travel | 300 mm |
| Z-Axis Travel | 420 mm |
| Max Workpiece Weight | 800 kg |
| Max Workpiece Height | 420 mm |
| Generator Power | Digital solid-state transistor generator, 16A peak |
| Surface Finish | Ra 0.2 µm (precision finish capable) |
| CNC Control | Sodick LN (Linear iQ) control |
| Machine Weight | 5,200 kg |
Our best estimate for the Sodick AG400LH is $280,000 - $380,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag400lh#price; the request is passed to Sodick or an authorised dealer.
No. It is not in Sodick's current lineup and is most likely an older model, so it is sold used. The listed figures could not be checked against a manufacturer page.
The listed figures give X 400 mm, Y 300 mm and Z 420 mm, with a 680 x 500 mm table and a maximum workpiece height of 420 mm. U/V travel is not listed.
Both move 400 mm in X and 300 mm in Y. The AL400G has 250 mm of Z and weighs 3,400 kg; the AG400LH is listed with 420 mm of Z and 5,200 kg. Measure the Z stroke on any used AG400LH before relying on it.
The listed figure is 800 kg on a 680 x 500 mm table. Add the 5,200 kg machine weight when checking the floor for a used unit.
