The Sodick AG40L is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG40L sinker EDM: 400 x 300 mm X/Y travel, 600 x 400 mm table, 750 x 620 x 350 mm tank, 550 kg workpieces, linear motors. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 400 mm (15.75 in) |
| Y-Axis Travel | 300 mm (11.81 in) |
| Z-Axis Travel | 270 mm (10.63 in) |
| Work Table Size | 600 x 400 mm (23.6 x 15.75 in) |
| Work Tank Dimensions | 750 x 620 x 350 mm (29.5 x 24.4 x 13.8 in) |
| Max Workpiece Weight | 550 kg (1,213 lb) |
| Electrode To Table Clearance | 150 - 420 mm (5.9 - 16.5 in) |
| Axis Feed Rate | 36,000 mm/min (1,400 ipm) |
| Acceleration | 1.2G |
| Drive System | Linear motors (X, Y, Z) |
| Generator | TMM3 power supply |
| Surface Finish | VDI 12 / Ra 0.40 um with graphite |
| Electrode Wear | Near-zero on finishing (zero-wear circuit) |
| CNC Control | Sodick LQ controller |
| Machine Dimensions | 1,550 x 2,350 x 2,330 mm (61.0 x 92.5 x 91.7 in) |
| Machine Weight | 3,900 kg (8,598 lb) |
| X Y Travel | 400 x 300 mm (15.7 x 11.8 in) |
| Z Travel | 250 mm (9.8 in) |
| U V Travel | ±40 mm (±1.6 in) |
| Max Workpiece Dimensions | 750 x 600 x 250 mm |
| Wire Diameter Range | 0.1 – 0.3 mm (brass or coated wire) |
| Max Cutting Speed | 350 mm²/min (in 50 mm steel with 0.25 mm wire) |
| Max Taper Angle | ±30° over 80 mm height |
| Auto Wire Threading | Yes — water-jet assist |
| Machine Footprint | Approx. 1,800 x 2,100 mm |
| Power Supply | 200V, 3-phase, 50/60 Hz |
Our best estimate for the Sodick AG40L is $120,000 - $180,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag40l#price; the request is passed to Sodick or an authorised dealer.
This table lists both 270 mm (10.63 in) and 250 mm (9.8 in). The AGL Series Sinker EDM page gives the AG40L 270 mm of Z, together with a 150 – 420 mm distance from the workpiece mounting surface to the table, so 270 mm is the more likely figure. Measure it on the machine.
A sinker EDM. The table on this page includes wire diameter, taper angle, U/V travel and wire threading rows that belong to a wire machine. They do not describe the AG40L, which has a work table, a 750 x 620 x 350 mm work tank and linear motors on X, Y and Z.
The AL40G+ has 15.75 in (400 mm) of X, 11.81 in (300 mm) of Y and 10.63 in (270 mm) of Z on a 600 × 400 mm table, the same travels and table that the AGL Series Sinker EDM page gives for the AG40L. The AL40G+ weighs 9,039 lb (4,100 kg).
The listed supply is 200V, 3-phase, 50/60 Hz. The machine measures 1,550 x 2,350 x 2,330 mm (61.0 x 92.5 x 91.7 in) and weighs 3,900 kg (8,598 lb), so plan rigging and floor loading for close to four tonnes.
