The Sodick AG600 is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN2W CNC with K-SMC adaptive control. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG600 sinker EDM: listed 800 x 600 x 500 mm travel, 1,200 x 800 mm table, 2,000 kg workpieces, 160 A peak generator. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN2W CNC with K-SMC adaptive control |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Table / Platter / Chuck Size | 1,200 mm × 800 mm |
| Approx. Machine Weight | 12,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 500 mm |
| Table Size | 1,200 mm × 800 mm |
| Max Workpiece Weight | 2,000 kg |
| Generator Amperage | 160 A peak (high-current SP digital generator) |
| Surface Finish | Ra 0.2 µm (fine-finish conditions) |
| Dielectric | Dielectric oil with temperature-controlled circulation |
| CNC Control | Sodick LN2W CNC with K-SMC adaptive control |
| Machine Weight | Approx. 12,000 kg |
Our best estimate for the Sodick AG600 is $350,000 - $600,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag600-sinker#price; the request is passed to Sodick or an authorised dealer.
It is not in Sodick's current lineup. For a new machine of similar size, the AL80G+ offers 33.46 in (850 mm) of X, 20.47 in (520 mm) of Y and 16.53 in (420 mm) of Z on a 43.31 in × 27.56 in (1,100 × 700 mm) table.
The listed table is 1,200 mm × 800 mm with a 2,000 kg workpiece limit, and the travels are 800 mm, 600 mm and 500 mm. The table gives no work tank size, so measure the tank before planning a part close to the table's size.
The AG80L page lists the same 800 mm X, 600 mm Y and 500 mm Z, but a 5,000 kg workpiece limit and 9,500 kg machine weight against 2,000 kg and approx. 12,000 kg here. Neither table has been checked against Sodick, so confirm the model and measure.
The listed table names a high-current SP digital generator rated at 160 A peak, with a Sodick LN2W CNC and K-SMC adaptive control. Fine-finish conditions are listed at Ra 0.2 µm. Check the generator's rating plate on a used machine.
