The Sodick AG600LH is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG600LH wire EDM, an older model: 600 x 400 x 420 mm travels, 900 x 620 mm table, 1,500 kg part weight, ±15° taper, 0.10-0.30 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 8,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 600 mm (23.6 in) |
| Y-Axis Travel | 400 mm (15.7 in) |
| Z-Axis Travel | 420 mm (16.5 in) |
| Uv Taper Range | ±15° / 100 mm height |
| Work Table Size | 900 x 620 mm (35.4 x 24.4 in) |
| Max Workpiece Weight | 1,500 kg (3,307 lb) |
| Max Workpiece Height | 420 mm (16.5 in) |
| Wire Diameter Range | 0.10 - 0.30 mm |
| Drive System | Linear Hybrid — linear motors (X, Y, U, V axes) with enhanced thermal compensation |
| Generator | SP9 with enhanced e-pak discharge circuit |
| Surface Finish | Ra 0.10 um achievable (near mirror finish) |
| Positioning Accuracy | ±0.001 mm |
| CNC Control | Sodick LQ controller |
| Awt | Automatic wire threading with in-cut re-threading |
| Machine Weight | approx. 8,500 kg (18,739 lb) |
Our best estimate for the Sodick AG600LH is $280,000 - $400,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag600lh#price; the request is passed to Sodick or an authorised dealer.
It is not in Sodick's current lineup and is most likely an older model. Buyers will be looking at used machines, and the listed figures could not be checked against a manufacturer page.
The listed range is ±15° / 100 mm height. That is enough for typical die clearance but not for steep tapered profiles, so test the range on the actual machine.
Both cover 600 mm of X and 400 mm of Y. The AL600G has 350 mm of Z and weighs 4,600 kg; the AG600LH is listed with 420 mm of Z and approx. 8,500 kg. The AL600G is a current model.
The listed figures give 1,500 kg (3,307 lb) and a maximum height of 420 mm (16.5 in) on a 900 x 620 mm (35.4 x 24.4 in) table, with the cut path inside 600 x 400 mm of travel.
