The Sodick AG60L is an industrial-grade CNC Wire & Sinker EDM powered by the LN2W CNC. It offers working travels of 600 x 420 x 350 mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG60L sinker EDM: listed 600 x 420 x 350 mm travel, 650 x 450 mm table, 1,000 kg workpieces, linear motors. Older model, figures unchecked.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | LN2W CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 600 mm |
| Y-Axis Travel | 420 mm |
| Z-Axis Travel | 350 mm |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 600 mm (23.6 in) |
| Y Axis Travel | 420 mm (16.5 in) |
| Z Axis Travel | 350 mm (13.8 in) |
| Work Table | 650 x 450 mm (25.6 x 17.7 in) |
| Tank Internal | 1,050 x 650 mm (41.3 x 25.6 in) |
| Max Workpiece Weight | 1,000 kg (2,205 lb) |
| Max Electrode Weight | 100 kg (220 lb) |
| Positioning Accuracy | ±0.001 mm (±0.00004 in) |
| Best Surface Finish | Ra 0.1 µm (4 µin) |
| Drive System | Linear motors (all axes) |
| CNC Control | LN2W CNC |
| Max Machining Current | 60A |
| Power Supply | Sodick LN2W integrated |
| Power Requirement | 200/220V, 3-phase |
| Machine Weight | ~4,500 kg (9,921 lb) |
Our best estimate for the Sodick AG60L is $200,000-$300,000 (new). This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag60l#price; the request is passed to Sodick or an authorised dealer.
It does not appear in Sodick's current lineup. The current AL60G has the same 23.62 in (600 mm) of X and 16.54 in (420 mm) of Y, with 14.57 in (370 mm) of Z on a 29.53 in × 21.65 in (750 × 550 mm) table.
This table has not been checked against Sodick. The AGL Series Sinker EDM page lists the AG60L with 370 mm of Z, a 750 x 550 mm table, a 1,500 kg workpiece limit and 5,150 kg machine weight, against 350 mm, 650 x 450 mm, 1,000 kg and ~4,500 kg here. Measure the machine you are offered.
The listed limit is 100 kg (220 lb), with workpieces up to 1,000 kg (2,205 lb) on the table. Confirm both on the machine's nameplate or manual, because neither figure has been checked against Sodick.
The listed supply is 200/220V, 3-phase, feeding the integrated LN2W power supply with 60A maximum machining current. Check that the shop supply and any transformer match before moving a used machine.
