The Sodick AG60L CNC Sinker EDM is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LN2W CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AG60L CNC Sinker EDM: listed 600x400x400 mm travel, 800 kg workpieces, linear motors, optional 16-position electrode changer.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LN2W CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Travel | 600x400x400 mm (X/Y/Z) |
| Maximum Workpiece | 1000x700x400 mm |
| Maximum Workpiece Weight | 800 kg |
| Drive System | All-axis linear motor drive (no ballscrews) |
| Generator | Sodick SP generator (digital) with K-SMC adaptive |
| Electrode Changer | 16-position AEC optional |
| Dielectric Tank | 600x400 mm working area |
| Surface Finish | Ra 0.1 micron (finishing conditions) |
| CNC Control | Sodick LN2W CNC |
| Power Input | 200V, 3-phase |
Our best estimate for the Sodick AG60L CNC Sinker EDM is $250,000 – $500,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ag60l-sinker-edm#price; the request is passed to Sodick or an authorised dealer.
The listed table gives a 16-position AEC as optional, not standard. On a used machine, confirm that the changer is fitted, that its positions suit the electrode holders you use, and that the control is set up to run it.
This table has not been checked against Sodick. The AGL Series Sinker EDM page lists the AG60L with 600 mm of X, 420 mm of Y, 370 mm of Z and a 1,500 kg workpiece limit; this page lists 600x400x400 mm and 800 kg. Measure the machine before relying on either.
The listed maximum is 1000x700x400 mm and 800 kg. The same table describes the dielectric tank as a 600x400 mm working area, which a part of that size could not fit, so check the tank and table dimensions in person.
The listed table names a Sodick LN2W CNC and a Sodick SP digital generator with K-SMC adaptive control, running on a 200V, 3-phase supply. Its Ra 0.1 micron finish is quoted for finishing conditions only.
