The Sodick AL1000G is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AL1000G linear-motor sinker EDM: 1,000 x 800 x 500 mm travels, 1,250 x 1,000 mm table, 4,000 kg workpiece, 18,000 kg. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 18,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 1,000 mm (39.4 in) |
| Y-Axis Travel | 800 mm (31.5 in) |
| Z-Axis Travel | 500 mm (19.7 in) |
| Work Table Size | 1,250 x 1,000 mm (49.2 x 39.4 in) |
| Work Tank Inner | 1,500 x 1,200 x 600 mm (59.1 x 47.2 x 23.6 in) |
| Max Workpiece Weight | 4,000 kg (8,818 lb) |
| Electrode To Table Clearance | 200 - 700 mm (7.9 - 27.6 in) |
| Axis Feed Rate | 36,000 mm/min (1,400 ipm) |
| Acceleration | 1.2G |
| Drive System | Linear motors (X, Y, Z) |
| Generator | TMM3 with zero-wear and e-pack fine-pulse |
| Surface Finish | VDI 4 / Ra 0.10 um (with e-pack fine-pulse) |
| Electrode Wear | Near-zero on finishing (zero-wear circuit) |
| CNC Control | Sodick LQ controller |
| Machine Dimensions | 4,100 x 3,800 x 3,200 mm (161 x 150 x 126 in) |
| Machine Weight | 18,000 kg (39,683 lb) |
Our best estimate for the Sodick AL1000G is $380,000 - $520,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-al1000g#price; the request is passed to Sodick or an authorised dealer.
The AL1000G is not in Sodick's current lineup and may be an older model. Its table has not been checked against Sodick's documents, so a buyer should confirm the travels, tank size and weight on the machine and ask for its service history before relying on the listed figures.
The table is 1,250 x 1,000 mm (49.2 x 39.4 in), the tank is 1,500 x 1,200 x 600 mm (59.1 x 47.2 x 23.6 in) inside and the workpiece limit is 4,000 kg (8,818 lb). The electrode reaches 1,000 x 800 mm (39.4 x 31.5 in) of the plate, and the workpiece and electrode together must fit within the 200 - 700 mm (7.9 - 27.6 in) electrode-to-table clearance.
The AL100G lists 47.24 in (1,200 mm) of X, 25.60 in (650 mm) of Y and 19.69 in (500 mm) of Z on a 63.0 in × 39.37 in (1,600 × 1,000 mm) table, at 27,557.78 lb (12,500 kg). The AL1000G lists 1,000 x 800 x 500 mm (39.4 x 31.5 x 19.7 in) on a 1,250 x 1,000 mm table at 18,000 kg (39,683 lb), so it is shorter in X, longer in Y and much heavier.
The listed table gives a TMM3 generator with a zero-wear circuit and e-pack fine-pulse, and the Sodick LQ controller. With e-pack fine-pulse the listed finish is VDI 4 / Ra 0.10 µm, and electrode wear on finishing is described as near-zero. Check that a used machine has the e-pack circuit fitted.
The machine is listed at 4,100 x 3,800 x 3,200 mm (161 x 150 x 126 in) and 18,000 kg (39,683 lb). That calls for a floor rated for the load, access for a crane or heavy rigging, and headroom above the 3,200 mm height for opening and service.
