The Sodick ALC800G is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick SPM control. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick ALC800G wire EDM: listed 800 x 600 x 350 mm travels, +/-100 mm U/V, +/-25° taper at 130 mm, 2,000 kg part weight, 0.10-0.30 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick SPM control |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 800 mm (31.50 in) |
| Y-Axis Travel | 600 mm (23.62 in) |
| Z-Axis Travel | 350 mm (13.78 in) |
| U Axis | +/-100 mm (+/-3.94 in) |
| V Axis | +/-100 mm (+/-3.94 in) |
| Max Taper Angle | +/-25° at 130 mm height |
| Max Workpiece Weight | 2,000 kg (4,409 lb) |
| Wire Diameter Range | 0.10 - 0.30 mm (0.004 - 0.012 in) |
| Surface Finish | Ra 0.20 µm (8 µin Ra) |
| Positioning Accuracy | +/-3 µm |
| Drive System | Flat rigid linear motors (X, Y, U, V) |
| Scales | Glass scales on all axes |
| Generator | Smart Pulse Generator (SPG) |
| CNC Control | Sodick SPM control |
| Work Tank | 3-sided rise/fall with automatic fluid level adjustment |
Our best estimate for the Sodick ALC800G is $200,000 - $300,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-alc800g#price; the request is passed to Sodick or an authorised dealer.
It is not in Sodick's current lineup and may be an older model. The listed figures could not be checked against a manufacturer page, so confirm them on any machine on offer.
The ALC600G moves 600 mm in X, 400 mm in Y and 350 mm in Z and takes 1,000 kg. The ALC800G is listed at 800 mm, 600 mm and 350 mm with a 2,000 kg part limit, so it adds area and capacity but no height.
The listed figure is +/-25° at 130 mm height, with +/-100 mm (+/-3.94 in) of travel on each of U and V. Check the taper range on the actual machine before quoting steep tapered work.
If parts are taller than 350 mm or heavier than 2,000 kg, yes. The AL800G has 800 x 600 x 500 mm of travel and a flushed part limit of 3,000 kg, and it is in Sodick's current lineup.
