The Sodick AP350L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AP350L wire EDM: 350 x 350 x 120 mm travels, ±7° taper at 100 mm, 540 x 500 x 100 mm / 100 kg submerged workpiece, 0.05-0.25 mm wire.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,650 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 350 mm |
| Y-Axis Travel | 350 mm |
| Z-Axis Travel | 120 mm |
| Uv Axis Travel | 35 × 35 mm |
| Max Taper Angle | ±7°(plate thickness:100mm) |
| Max Workpiece Size Submerged | 540 × 500 × 100 mm |
| Max Workpiece Weight Submerged | 100 kg |
| Wire Diameter | 0.05 - 0.25 mm |
| Wire Tension | 3 - 25 N |
| Max Wire Feed Rate | 250 mm/sec |
| Floor To Table | 1,084 mm |
| Footprint | 1,985 × 2,095 × 2,160 mm |
| Installation Footprint | 3,705 × 3,515 mm |
| Machine Weight | 4,650 kg |
| Power Supply | 3-phase 50/60Hz 13 kVA |
Our best estimate for the Sodick AP350L is $200,000 - $290,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-sodick-ap350l#price; the request is passed to Sodick or an authorised dealer.
Sodick lists a submerged workpiece limit of 540 × 500 × 100 mm and 100 kg. X and Y travel are both 350 mm and Z travel is 120 mm, so the part can be larger in plan than the area the wire can reach.
Up to ±7° at a plate thickness of 100 mm, with U/V travel of 35 × 35 mm. That makes it a machine for straight walls and light draft rather than steep die relief; work that needs larger angles belongs on a machine with more U/V travel.
The AP650L keeps the same 120 mm of Z but extends X to 650 mm and Y to 450 mm, and weighs 6,300 kg against 4,650 kg for the AP350L. If parts fit within 350 × 350 mm of travel, the AP350L is the smaller and lighter of the two.
Allow an installation area of 3,705 × 3,515 mm around a machine body of 1,985 × 2,095 × 2,160 mm. The machine weighs 4,650 kg, the table is 1,084 mm above the floor, and the power supply is 3-phase 50/60Hz at 13 kVA.
