The Sodick AX350L is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick AX350L fine-wire EDM: 350 x 350 mm X/Y travel, Ø0.05-Ø0.25 mm wire, 540 x 500 x 100 mm workpiece, ±15° taper, 4,950 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 10,913 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Workpiece Size | 21.26 in × 19.69 in × 3.94 in (540 × 500 × 100 mm) |
| Max Workpiece Weight | 661 lb (300 kg) |
| X-Axis Travel | 13.78 in (350 mm) |
| Y-Axis Travel | 13.78 in (350 mm) |
| Z-Axis Travel | 4.72 in (+3.94 in)* (120mm +100mm) |
| Uv Axis Travel | 3.15 in × 3.15 in (80 × 80 mm) |
| Max Taper Angle | ±15° (at 3.94 in / 100mm thickness) |
| Wire Diameter | Ø0.002 in - Ø0.010 in (Ø0.05 - Ø0.25 mm) |
| Wire Feed Rate | 590 in/min (250 mm/sec) |
| Wire Tension | 3 - 25 N |
| Floor To Table | 37.40 in (950 mm) |
| Footprint | 62.99 in × 98.62 in × 86.02 in (1,600 × 2,505 × 2,185 mm); Body height: 84.45 in (2,145mm) |
| Machine Weight | 10,913 lb (4,950 kg) |
| Air Pressure | 0.5 MPa, 30 NL/min |
Our best estimate for the Sodick AX350L is $180,000 - $260,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-ax350l#price; the request is passed to Sodick or an authorised dealer.
Wire from Ø0.002 in to Ø0.010 in (Ø0.05 - Ø0.25 mm). Wire tension is adjustable from 3 to 25 N and the wire feed runs at up to 590 in/min (250 mm/sec). The fine end of that range is the reason to choose this machine for small corner radii and narrow slots.
Up to 21.26 in × 19.69 in × 3.94 in (540 × 500 × 100 mm) and 661 lb (300 kg). The part can overhang the 13.78 in × 13.78 in (350 × 350 mm) X/Y stroke, but only the area within that stroke can be cut, and the 3.94 in (100 mm) height limit rules out thick blocks.
The maximum taper angle is ±15° at 3.94 in (100mm) thickness, with U/V travel of 3.15 in × 3.15 in (80 × 80 mm). That covers die clearance and moderate draft angles; a steeper taper on a thick part is outside the listed range.
Floor space of 62.99 in × 98.62 in × 86.02 in (1,600 × 2,505 × 2,185 mm), a floor for 10,913 lb (4,950 kg), and compressed air at 0.5 MPa, 30 NL/min. The table sits 37.40 in (950 mm) above the floor.
