The Sodick EXC100L+ is an industrial-grade CNC Wire & Sinker EDM powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick EXC100L+ micro wire EDM: 3.94 x 4.72 x 3.94 in (100 x 120 x 100 mm) travels, Ø0.02-0.1 mm wire, ±6° taper, 10 kg workpiece.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,512 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 3.94 in (100 mm) |
| Y-Axis Travel | 4.72 in (120 mm) |
| Z-Axis Travel | 3.94 in (100 mm) |
| Uv Axis Travel | 0.79 in × 0.79 in (20 × 20 mm) |
| Max Taper Angle | ±6° (at 2.36 in / 60mm thickness) |
| Max Workpiece Size | 5.91 in × 5.91 in × 2.36 in (150 × 150 × 60 mm) |
| Max Workpiece Weight | 22 lb (10 kg, includes jigs) |
| Wire Diameter | Ø0.0008 in - Ø0.004 in (Ø0.02 - Ø0.1 mm) |
| Wire Tension | 0.5 - 10 N |
| Wire Feed Rate | 590 in/min (250 mm/sec) |
| Floor To Table | 41.34 in (1,050 mm) |
| Footprint | 88.58 in × 90.16 in × 78.35 in (2,250 × 2,290 × 1,990 mm); Includes power supply and dielectric tank |
| Air Pressure | 0.6 - 0.9 MPa |
| Machine Weight | 5,512 lb (2,500 kg) |
| Power Supply | 3-phase 50/60Hz 9 kVA |
Our best estimate for the Sodick EXC100L+ is $280,000 - $400,000. This is an estimate for a wire edm in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-sodick-exc100l-plus#price; the request is passed to Sodick or an authorised dealer.
Ø0.0008 in (Ø0.02 mm). The range runs up to Ø0.004 in (Ø0.1 mm), and wire tension can be set from 0.5 to 10 N, so very fine wire can be run at low tension. It is not built for the heavier wire used on general-purpose wire EDMs.
Up to 5.91 in × 5.91 in × 2.36 in (150 × 150 × 60 mm) and 22 lb (10 kg), with the jig counted in that weight. X, Y and Z travel are 3.94 in (100 mm), 4.72 in (120 mm) and 3.94 in (100 mm).
When parts exceed the micro machine's envelope. The ALC400G has 15.75 in (400 mm) of X, 11.81 in (300 mm) of Y and 9.84 in (250 mm) of Z and weighs 7,496 lb (3,400 kg). The EXC100L+ is the choice when wire size, not part size, sets the limit.
A 3-phase 50/60Hz supply rated at 9 kVA and compressed air at 0.6 - 0.9 MPa. Floor space is 88.58 in × 90.16 in × 78.35 in (2,250 × 2,290 × 1,990 mm), which already includes the power supply and dielectric tank, and the machine weighs 5,512 lb (2,500 kg).
