The Sodick K3L-C is an industrial-grade CNC Wire & Sinker EDM powered by the Sodick LQ controller with NC orbiting. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Sodick K3L-C linear-motor sinker EDM: 350 x 250 x 250 mm travels, 500 x 350 mm table, 300 kg workpiece, 30 kg electrode. Older model.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Sodick (Japan) |
| Machine Type | CNC Wire & Sinker EDM |
| CNC Controller System | Sodick LQ controller with NC orbiting |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 350 mm (13.8 in) |
| Y-Axis Travel | 250 mm (9.84 in) |
| Z-Axis Travel | 250 mm (9.84 in) |
| Work Table Size | 500 x 350 mm (19.7 x 13.8 in) |
| Max Workpiece Weight | 300 kg (661 lb) |
| Max Electrode Weight | 30 kg (66 lb) |
| Drive System | Linear motors (X, Y, Z axes) |
| Generator | Sodick LN1W adaptive discharge generator |
| Surface Finish | VDI 0 (mirror) achievable on final finish passes |
| Positioning Resolution | 0.1 µm |
| Positioning Accuracy | ±0.001 mm |
| Dielectric | Hydrocarbon oil (Sodick EDM fluid) |
| CNC Control | Sodick LQ controller with NC orbiting |
| Orbital Motion | 3D orbital, circular, helical, and user-defined |
| Machine Weight | approx. 2,200 kg (4,850 lb) |
Our best estimate for the Sodick K3L-C is $120,000 - $170,000. This is an estimate for a sinker edm (ram edm) in this class, not a quote from Sodick; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/sodick-k3l-c#price; the request is passed to Sodick or an authorised dealer.
No. The K3L-C is not in Sodick's current lineup and may be an older model. Its table could not be checked against Sodick's documents, so confirm the travels, the controller fitted and the generator on the machine itself before buying.
The listed table gives a Sodick LQ controller with NC orbiting in 3D orbital, circular, helical and user-defined patterns. On a used machine, check that the orbit functions are enabled in the control and run a test cavity before relying on them.
The table is 500 x 350 mm (19.7 x 13.8 in), the workpiece limit is 300 kg (661 lb) and the electrode can weigh up to 30 kg (66 lb). The electrode reaches 350 x 250 mm (13.8 x 9.84 in) of the part, with 250 mm (9.84 in) of Z for electrode length and part height combined.
That is the listed positioning accuracy, alongside 0.1 µm resolution. Neither has been checked against Sodick's documents, and figures this tight depend on temperature control and machine condition. Ask for a measured positioning test on the machine you are buying.
