The Star Micronics SR-38J is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SR-38J Swiss-type lathe: 38 mm (1.50 in) bar, Ø42mm non-guide-bush turning, up to 10 axes with Y1, Y2, C1, C2, ±20 mm Y stroke.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 38 mm (1.50 in) |
| Max Machining Diameter | 38 mm (1.50 in) |
| Number Of Axes | Up to 10 (including Y1, Y2, C1, C2) |
| Y Axis Stroke | ±20 mm |
| Max Turning Diameter | Ø38mm (1-1/2in) |
| Max Turning Diameter Non Guide Bush | Ø42mm (1-21/32in) |
| Spindle Motor Power | 7.5kW (continuous) / 11kW (10min./25%ED) |
Our best estimate for the Star SR-38J is $300,000 - $480,000. This is an estimate for a swiss-type lathes in this class, not a quote from Star Micronics; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/star-micronics-sr-38j#price; the request is passed to Star Micronics or an authorised dealer.
Yes. Star lists a maximum turning diameter of Ø42mm (1-21/32in) for non-guide-bush operation, against Ø38mm (1-1/2in) otherwise. Without the bush the bar is supported only at the spindle, so that mode is normally used for shorter parts.
Up to 10, including Y1, Y2, C1 and C2, with a Y-axis stroke of ±20 mm. Because the count is given as an upper limit, ask for the axis list of the specific machine on offer.
7.5kW continuous and 11kW at the 10min./25%ED rating. Star's table for this model does not list a spindle speed or a sub-spindle rating, so request those along with the quotation.
