The Star Micronics SV-32R is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Star SV-32R Swiss-type lathe: 32 mm (1.260 in) bar, 26 tool positions including live tools, up to 10 axes with B-axis, ±12 mm Y-axis stroke.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Star Micronics (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Bar Capacity | 32 mm (1.260 in) |
| Max Machining Diameter | 32 mm (1.260 in) |
| Number Of Axes | Up to 10 (including B-axis, Y1, Y2, C1, C2) |
| Tool Positions | 26 (including live tools) |
| Y Axis Stroke | ±12 mm |
| Max Turning Diameter | Ø32mm (1/1/4in) |
| Chuck Size | ø32mm (1/1/4in) |
| Cnc Control | 9-axis controller |
Our best estimate for the Star SV-32R is $250,000 - $380,000. This is an estimate for a swiss-type lathes in this class, not a quote from Star Micronics; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/star-micronics-sv-32r#price; the request is passed to Star Micronics or an authorised dealer.
26 tool positions, including live tools. The table does not break that down into turning, live and back-working positions, so request the tooling layout if a job depends on a particular number of driven tools.
The Y-axis stroke is listed as ±12 mm. Both Y1 and Y2 are named in the axis row, and the table gives one stroke figure without saying whether it applies to both. On 32 mm (1.260 in) bar, that travel stops short of the bar's edge.
Yes. The axis row reads up to 10 axes including B-axis, Y1, Y2, C1 and C2. A B-axis lets driven tools cut at an angle to the bar, which removes the need for fixed-angle holders on inclined holes and faces.
