The Tsugami B020M-III is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B020M-III: 20 mm Swiss-type lathe with a B-axis tool spindle (-10° to 185°, 25,000 rpm), 30 Capto C3 tools, 10,000 rpm main spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 3.7 kW |
| Spindle Taper Interface | Standard |
| Automatic Tool Changer (ATC) | 30 Tool Stations |
| Approx. Machine Weight | 5,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Machining Diameter | 20 mm (0.79 in) |
| Max Spindle Speed | 10,000 rpm (rated 8,000 rpm) |
| Sub Spindle Speed | 12,000 rpm (rated 8,000 rpm) |
| Tool Spindle Speed | 25,000 rpm (rated 20,000 rpm) |
| B Axis Index | 0.001° (positioning) |
| B Axis Range | -10° to 185° |
| Tool Capacity | 30 |
| Tool Shank | Capto C3 |
| Rapid Traverse | 35 m/min (X2, Z2), 32 m/min (A1), 30 m/min (X1, Z1), 24 m/min (Y2), 20 m/min (Y1) |
| Spindle Motor Power | 3.7/5.5 kW |
| Sub Spindle Power | 2.2/3.7 kW |
| Tool Spindle Power | 2.2/3.7 kW |
| Footprint | 2,500 × 1,905 × 1,920 mm (98.4 × 75.0 × 75.6 in) |
| Machine Weight | 5,300 kg (11,684 lb) |
Our best estimate for the Tsugami B020M-III is $350,000 - $500,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-b020m-iii#price; the request is passed to Tsugami or an authorised dealer.
It swivels the tool spindle from -10° to 185°, positioned in 0.001° increments. With that spindle running to 25,000 rpm (rated 20,000 rpm), the machine can drill and mill at compound angles while the part is still held, rather than sending it to a mill for a second operation.
The listed maximum machining diameter is 20 mm (0.79 in). The table does not give a machining length per chucking or a separate through-spindle figure, so confirm both with Tsugami against the longest part you intend to run.
The table lists a tool capacity of 30, with Capto C3 as the tool shank. Capto is a polygon-taper holder system, so tools can be preset in their holders away from the machine before a job change.
Main spindle: 10,000 rpm (rated 8,000 rpm) on 3.7/5.5 kW. Sub spindle: 12,000 rpm (rated 8,000 rpm) on 2.2/3.7 kW. Tool spindle: 25,000 rpm (rated 20,000 rpm) on 2.2/3.7 kW. The speeds favour small diameters and small cutters; the power ratings favour light cuts.
Tsugami lists the footprint as 2,500 × 1,905 × 1,920 mm (98.4 × 75.0 × 75.6 in) and the weight as 5,300 kg (11,684 lb). Add room for bar loading and chip handling around that envelope, and check the floor before the machine arrives.
