The Tsugami B0326-II Multi-Spindle CNC Automatic is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B0326-II multi-spindle automatic (listed figures, unverified): 6 spindles, 32 mm bar, 6,000 rpm, 6 cross slides plus end-working unit.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 20.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 14,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Number Of Spindles | 6 |
| Max Bar Diameter | 32 mm |
| Max Spindle Speed | 6,000 rpm |
| Spindle Motor Power | 20 kW (total installed) |
| Bar Feed Capacity | Front-loaded magazine bar feeder compatible |
| Cross Slides | 6 cross slides (one per position) + end-working unit |
| Control System | Tsugami proprietary CNC with multi-spindle synchronization |
| Machine Weight | Approx. 14,000 kg |
| Model | BW129Z |
| Spindle Bore | 23.5 mm |
| Power Requirement | 9.68 kW |
Our best estimate for the Tsugami B0326-II Multi-Spindle CNC Automatic is $700,000 – $1,200,000. This is an estimate for a multi-spindle automatics in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-b0326-ii-multi-spindle#price; the request is passed to Tsugami or an authorised dealer.
No. The table comes from a third-party listing and could not be checked against Tsugami. It also contradicts itself: the model row reads BW129Z and the 23.5 mm spindle bore is smaller than the 32 mm bar capacity. Confirm every figure on the machine before buying.
The B0326 is shown at 4,000 kg (8,818 lb). This multi-spindle listing gives approx. 14,000 kg and 6 spindles. The two weights describe very different machines, so check which one is actually on offer before comparing quotes or planning a foundation.
The listed table gives 6 spindles, 6 cross slides (one per position) and an end-working unit. Count the spindles and slides on the actual machine; the same table carries a model row reading BW129Z, so its layout figures may belong to another machine.
The listed maximum bar diameter is 32 mm, with a maximum spindle speed of 6,000 rpm and compatibility with a front-loaded magazine bar feeder. The listed spindle bore of 23.5 mm is smaller than 32 mm, so measure the bore before buying bar stock.
