The Tsugami B038-III is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 32i-B. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B038-III Swiss-type lathe: 38 mm (1.5 in) bar, 6 axes, 7.5/11 kW 200-6,000 RPM main spindle, 32/42 tools with 15/26 live.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 32i-B |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 4,850 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 38 mm (1.5 in) |
| Main Spindle Speed | 200-6,000 RPM |
| Sub Spindle Speed | 200-7,000 RPM |
| Spindle Motor | 7.5/11 kW |
| Axes | 6 (X1, Y1, Z1, X2, Y2, Z2, C1, C2) |
| Live Tool Speed | 6,000 RPM |
| Tool Positions Std Max | 32/42 |
| Live Tool Positions Std Max | 15/26 |
| Headstock Stroke With Guide Bushing | 320 mm (12.6 in) |
| Headstock Stroke Without Guide Bushing | 70 mm (2.75 in) |
| Rapid Traverse Rate | 32 m/min |
| Guide Bushing | Convertible (Swiss/chucker) |
| CNC Control | FANUC 32i-B |
| Machine Weight | 4,850 kg (10,694 lbs) |
| Dimensions | 2,240 x 1,515 x 2,050 mm (88 x 60 x 81 in) |
Our best estimate for the Tsugami B038-III is $380,000 - $550,000. This is an estimate for a swiss-type lathes in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-b038-iii#price; the request is passed to Tsugami or an authorised dealer.
Six linear axes: X1, Y1, Z1 on one tool group and X2, Y2, Z2 on the other. The table also lists C1 and C2, the indexing axes of the main and sub-spindles. Y on both groups lets off-centre milling and drilling run on either side of the part.
The B038M runs to 7,000 rpm (rated 5,000 rpm) on a 3.7/5.5 kW motor, carries 40 tools and weighs 7,100 kg (15,653 lb). The B038-III is listed with a 7.5/11 kW main motor at 200-6,000 RPM, 32/42 tool positions and 4,850 kg (10,694 lbs). Pick on the balance of spindle power against tool count.
With the guide bushing the headstock stroke is 320 mm (12.6 in). Converted to run without it, the stroke is 70 mm (2.75 in). Long shafts belong on the bushing; short, stubby parts can run guide-bushless to leave a shorter remnant on each bar.
The main spindle runs 200-6,000 RPM on 7.5/11 kW and the sub-spindle 200-7,000 RPM, with live tools to 6,000 RPM. These are low speeds by Swiss-type standards because the machine is sized for 38 mm (1.5 in) bar, where cutting speed is reached at fewer revolutions.
