The Tsugami B073C is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami B073C guide-bushless chucker: 7 mm (0.275 in) bar, 15,000 RPM main spindle, 3 axes, up to 21 tool positions, FANUC 0i-TF.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bar Capacity | 7 mm (0.275 in) |
| Main Spindle Speed | 15,000 RPM |
| Axes | 3 |
| Spindle Motor | 1.1/1.5 kW (2 HP) |
| Tool Positions | Up to 21 |
| Rapid Traverse Rate | 32 m/min |
| Guide Bushing | Dedicated chucker (guide-bushless) |
| CNC Control | FANUC 0i-TF |
Our best estimate for the Tsugami B073C is $130,000 - $190,000. This is an estimate for a swiss-type lathes in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-b073c#price; the request is passed to Tsugami or an authorised dealer.
No. The listed figures describe it as a dedicated chucker (guide-bushless). The bar is held in the collet without a bushing in front, which suits short parts and reduces remnant. For long slender parts that need support close to the tool, a guide-bushing machine is the safer choice.
Both are listed with a 15,000 RPM main spindle on 1.1/1.5 kW. The B073-VR has a rated speed of 12,000 rpm, carries 13 tools as standard and weighs 1,350 kg (2,976 lb). The B073C is listed with up to 21 tool positions, but its table has not been checked against Tsugami and gives no weight.
A FANUC 0i-TF control and a rapid traverse rate of 32 m/min. The table gives one rapid figure rather than a rate per axis, so ask for per-axis rates if a cycle time estimate depends on them.
