The Tsugami C220 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami C220 loader lathe: 4 in chuck, 260 mm swing, 220 mm X and Z travel, 12,000 rpm 2.2/3.7 kW spindle, 2,200 kg with loader and pallets.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 2.2 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Swing | 260 mm (10.2 in) |
| X-Axis Travel | 220 mm (8.66 in) |
| Z-Axis Travel | 220 mm (8.66 in) |
| Chuck Size | 4 in |
| Max Spindle Speed | 12,000 rpm (rated 10,000 rpm) |
| Rapid Traverse | 15 m/min |
| Least Input Increment | 0.01 µm (X axis in diameter) |
| Spindle Motor Power | 2.2/3.7 kW |
| Footprint | 1,500 × 1,461 × 1,590 mm (59.1 × 57.5 × 62.6 in) (2,240 mm with loader) |
| Machine Weight | 2,200 kg (4,850 lb) (including loader and 2 pallets) |
The price estimate for the Tsugami C220 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-c220#price; the request is passed to Tsugami or an authorised dealer.
The C220 trades speed for envelope and power. Against the C180 it has 220 mm (8.66 in) of Z travel rather than 150 mm (5.91 in), a 260 mm (10.2 in) swing rather than 220 mm (8.66 in), a 2.2/3.7 kW motor rather than 1.5/2.2 kW, and a 4 in chuck where the C180 takes 3 in or 4 in. The C180 runs faster, to 15,000 rpm, with 24 m/min rapids against 15 m/min, and has 300 mm (11.8 in) of X travel against 220 mm (8.66 in).
Its weight of 2,200 kg (4,850 lb) is stated including the loader and 2 pallets, and the footprint row gives a 2,240 mm figure with the loader. Confirm with Tsugami which loader and pallet configuration that quotation covers.
The least input increment is 0.01 µm on the X axis in diameter. The C200 and C300-V both state 0.1 µm, so the C220 commands X in steps ten times finer. That is a control resolution, not an accuracy figure; the table gives no accuracy value.
It has a 4 in chuck, a 260 mm (10.2 in) maximum swing and 220 mm (8.66 in) of travel on both X and Z. No bar capacity is listed. For blanks that need a bigger chuck, the C300-V carries a 6 in chuck with 300 mm (11.8 in) of X and Z travel.
