The Tsugami FMA3-III is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the Standard CNC. a top spindle speed of 200 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami FMA3-III HMC: 300 x 300 mm pallet, 360 x 330 x 400 mm travels, 15,000 rpm 7.5 kW spindle, 1.0 sec tool change, 9.0 sec pallet change.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 200 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 11,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 360 mm (14.17 in) |
| Y-Axis Travel | 330 mm (13 in) |
| Z-Axis Travel | 400 mm (15.75 in) |
| Pallet Size | 300 × 300 mm (11.75 × 11.75 in) |
| Tool To Tool Time | 1.0 sec |
| Chip To Chip Time | 5.0 sec |
| Pallet Change Time | 9.0 sec |
| Rapid Traverse | 25.2 m/min (994 ipm) |
| Max Spindle Speed | 200 - 15,000 rpm |
| Spindle Motor Power | 7.5 kW (10 hp) |
| Footprint | 4,040 × 2,485 × 2,740 mm (159 × 97.8 × 107.8 in) |
| Machine Weight | 11,500 kg (25,300 lb) |
Our best estimate for the Tsugami FMA3-III is $250,000 - $450,000. This is an estimate for a horizontal machining centers (hmc) in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-fma3-iii#price; the request is passed to Tsugami or an authorised dealer.
Travels and pallet size are the same, 360 × 330 × 400 mm on a 300 × 300 mm pallet. The FMA3-V has a 22/26/37 kW spindle running to 10,000 rpm (rated 8,000 rpm), a 62-tool magazine and weighs 9,800 kg (21,605 lb). The FMA3-III runs faster, to 15,000 rpm, on a 7.5 kW (10 hp) spindle and weighs 11,500 kg (25,300 lb).
Tool-to-tool is 1.0 sec, chip-to-chip 5.0 sec and pallet change 9.0 sec. For parts with long cuts the pallet change hides most of the loading time; for parts with many short operations, budget around the 5.0 sec chip-to-chip figure per tool.
The listed spindle runs from 200 to 15,000 rpm and is rated 7.5 kW (10 hp). Tsugami America's table does not give the taper or a torque figure, so confirm toolholder type and low-speed torque before moving steel work onto it.
It weighs 11,500 kg (25,300 lb) and measures 4,040 × 2,485 × 2,740 mm (159 × 97.8 × 107.8 in). Allow for the 2,740 mm height when planning crane or door access, and have the floor checked for an 11,500 kg load before delivery.
