The Tsugami M06SY-II is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami M06SY-II: sub-spindle and Y-axis CNC lathe, 6 in chucks, 51 mm bar, 380 mm turning length, 12 stations, four rapid axes, 5,600 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Motor Rating | 7.5 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 5,600 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Max Turning Diameter | 260 mm (10.2 in) |
| Bar Capacity | 51 mm (2.01 in) |
| Max Turning Length | 380 mm (15.0 in) |
| Chuck Size | 6 in |
| Sub Spindle Chuck Size | 6 in |
| Max Spindle Speed | 4,500 rpm (rated 4,000 rpm) |
| Sub Spindle Speed | 4,500 rpm (rated 4,000 rpm) |
| Turret Stations | 12 |
| Rapid Traverse | 24 m/min (X), 27 m/min (Z), 12 m/min (Y), 30 m/min (A) |
| Spindle Motor Power | 7.5/11 kW |
| Sub Spindle Power | 5.5/7.5 kW |
| Footprint | 2,474 × 2,050 × 1,930 mm (97.4 × 80.7 × 76.0 in) |
| Machine Weight | 5,600 kg (12,346 lb) |
Our best estimate for the Tsugami M06SY-II is $180,000 - $250,000. This is an estimate for a cnc lathes / turning centers in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-m06sy-ii#price; the request is passed to Tsugami or an authorised dealer.
A sub-spindle. It carries a 6 in chuck, runs to 4,500 rpm (rated 4,000 rpm) on 5.5/7.5 kW and moves on an A axis at 30 m/min. The M06DY-II has the same Y axis at 12 m/min and the same main spindle, but finishes the back of the part in a second chucking. The M06DY-II weighs 5,200 kg (11,464 lb) against 5,600 kg (12,346 lb).
Its rapid traverse row lists X at 24 m/min, Z at 27 m/min, Y at 12 m/min and A at 30 m/min, plus the two spindles. The table does not give axis strokes, so ask Tsugami for the Y travel in particular.
5,600 kg (12,346 lb) on a footprint of 2,474 × 2,050 × 1,930 mm (97.4 × 80.7 × 76.0 in). The 1,930 mm height is worth checking against doorways and overhead cranes on the route in.
Only if the parts need off-centre features and second-side work. The M06D-II has the same 12-station turret, 51 mm (2.01 in) bar and 380 mm (15.0 in) length on a single spindle with no Y axis, and weighs 4,700 kg (10,362 lb). For simple turned parts the extra axes sit idle.
