The Tsugami M08J is an industrial-grade CNC Lathes & Turning Centers powered by the FANUC 0i-TF. a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Tsugami M08J 2-axis turning centre: 8 inch chuck, 65 mm bar, 280 mm turning diameter, 8-station turret, 9/11 kW spindle to 4,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Tsugami (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | FANUC 0i-TF |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,300 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Machine Type | 2-axis CNC turning centre, 8-inch chuck |
| Max Machining Diameter | φ280 mm (11.02 in); φ65 mm (2.56 in) barstock |
| Max Machining Length | 290 mm (11.4 in) |
| Chuck Size | 8 inch |
| Max Spindle Speed | 4,000 rpm |
| Spindle End | JIS A2-6 |
| Main Spindle Bore | φ73 mm (2.87 in) |
| Spindle Bearing Id | φ100 mm (3.94 in) |
| Number Of Stations | 8 |
| Od Tool Shank | 25 mm (0.98 in) |
| Drill Holder Hole Diameter | 40 mm (1.57 in) |
| Main Spindle Motor | 9 / 11 kW (12 / 15 hp) |
| Stroke Xz | X 160 mm (6.30 in) / Z 330 mm (12.99 in) |
| Rapid Traverse Xz | X 24 m/min / Z 27 m/min (945 / 1,062 ipm) |
| CNC Control | FANUC 0i-TF |
| Least Input Increment | 0.001 mm (0.00004 in) |
| Cutting Feed Rate | 1 to 6,000 mm/min (1 to 236 in/min) |
| Compressed Air Requirement | 0.5 MPa, 100 NL/min |
| Dimensions Wxdxh | 1,690 x 1,673 x 1,600 mm (66.54 x 65.87 x 62.99 in) |
| Machine Weight | 3,300 kg (7,275 lb) |
Our best estimate for the Tsugami M08J is $180,000 - $280,000. This is an estimate for a swiss-type lathes in this class, not a quote from Tsugami; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tsugami-m08j#price; the request is passed to Tsugami or an authorised dealer.
No. Its specification describes a 2-axis CNC turning centre with an 8 inch chuck and an 8-station turret. It turns up to 280 mm (11.02 in) in diameter and takes 65 mm (2.56 in) barstock. There is no guide bushing or sliding headstock in the figures.
The M08D-II has 12 turret stations where the M08J has 8. It also offers 380 mm (15.0 in) of turning length against 290 mm (11.4 in), and 4,500 rpm against 4,000 rpm, so the M08D-II is the longer, faster machine. The M08D-II weighs 4,700 kg (10,362 lb) against 3,300 kg (7,275 lb) for the M08J. The M08D-II and M08J both have an 8 inch chuck and 65 mm (2.56 in) bar capacity, and both motors top out at 11 kW.
The turret has 8 stations, takes 25 mm (0.98 in) OD tool shanks and has a 40 mm (1.57 in) drill holder hole. No driven tool stations are listed, so milling and cross drilling need a different machine.
A 27 kVA power supply, compressed air at 0.5 MPa, 100 NL/min, and floor space for 1,690 x 1,673 x 1,600 mm (66.54 x 65.87 x 62.99 in). The machine weighs 3,300 kg (7,275 lb).
On the figures, very little. The M08J-II lists the same 280 mm (11.0 in) turning diameter, 290 mm (11.4 in) length, 8 stations, 65 mm (2.56 in) bar and 3,300 kg (7,275 lb). The M08J-II spindle is given as 4,000 rpm (rated 3,500 rpm) with a 1,500 rpm low-speed type as an option, and its motor as 9/11 kW.
