Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA BM-1200II vs Haas Automation TM-1.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
Haas Automation
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | United States |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 8,000 RPM Highest RPM | 4,000 RPM |
| Spindle Motor Rating | 7.5 kW (10.1 HP) | 7.5 kW (10.1 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 1,200 mm | N/A |
| Y-Axis Travel | 650 mm | N/A |
| Z-Axis Travel | 610 mm | N/A |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 24 Tools | Standard ATC |
| Rapid Traverse Rate | 30 m/min (1,181 ipm) | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | FANUC Oi -MF Plus | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 7,500 kg Heaviest Base | 4,440 kg |
When evaluating AWEA BM-1200II vs Haas Automation TM-1, shop managers must weigh spindle kinematics against overall structural rigidity. Conversely, the AWEA BM-1200II offers high-speed finishing advantages with a top speed of 8,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.