Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA BM-1400II vs Haas Automation VF-3SSYT.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
Haas Automation
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | United States |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 8,000 RPM | 12,000 RPM Highest RPM |
| Spindle Motor Rating | 7.5 kW (10.1 HP) | 30.0 kW (40.2 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 1,400 mm | N/A |
| Y-Axis Travel | 650 mm | N/A |
| Z-Axis Travel | 610 mm | N/A |
| Table Surface Dimensions | 1,500 x 650 mm (59.1 x 25.6 in) | 54 × 24 in (1,372 × 610 mm) |
| Maximum Table Payload | 1,400 kg | 1,750 kg Heaviest Load |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 24 Tools | 30 Tools Largest ATC |
| Rapid Traverse Rate | 30 m/min (1,181 ipm) | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | FANUC Oi -MF Plus | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 8,100 kg | 15,000 kg Heaviest Base |
When evaluating AWEA BM-1400II vs Haas Automation VF-3SSYT, shop managers must weigh spindle kinematics against overall structural rigidity. The Haas Automation VF-3SSYT delivers a competitive edge in heavier stock removal with its 30.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.