Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Hardinge Bridgeport Series 1 Standard vs WIA Machine Tools KF6L.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Hardinge
View Specs Page →
|
WIA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | United States | International |
| Model Status / Year | 1938 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 4,200 RPM | Standard |
| Spindle Motor Rating | 1.5 kW (2 HP) | Standard |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 762 mm | N/A |
| Y-Axis Travel | 305 mm | N/A |
| Z-Axis Travel | 406 mm | N/A |
| Table Surface Dimensions | 1067 x 229 mm | Standard Worktable |
| Maximum Table Payload | 340 kg | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 1 Tools | Standard ATC |
| Rapid Traverse Rate | 2.5 m/min | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Manual / 2-Axis CNC Retrofit | Industrial CNC / PLC |
| MTConnect Telemetry Standard | Optional / Protocol Supported | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 950 kg | 1,300 kg Heaviest Base |
When evaluating Hardinge Bridgeport Series 1 Standard vs WIA Machine Tools KF6L, shop managers must weigh spindle kinematics against overall structural rigidity. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.