Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Dener TTH-8 vs DMG MORI NLX 4000 Y.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Dener
View Specs Page →
|
DMG MORI
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Lathes & Turning Centers | CNC Lathes & Turning Centers |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | Germany / Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 4,500 RPM Highest RPM | 2,500 RPM |
| Spindle Motor Rating | 15.0 kW (20.1 HP) | 30.0 kW (40.2 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 280 mm |
| Y-Axis Travel | N/A | 120 mm |
| Z-Axis Travel | N/A | 2,100 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | Standard ATC | Standard ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | CELOS with Siemens 840D solutionline |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | Standard Industrial Weight | 10,000 kg |
When evaluating Dener TTH-8 vs DMG MORI NLX 4000 Y, shop managers must weigh spindle kinematics against overall structural rigidity. The DMG MORI NLX 4000 Y delivers a competitive edge in heavier stock removal with its 30.0 kW spindle motor. Conversely, the Dener TTH-8 offers high-speed finishing advantages with a top speed of 4,500 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.