The Dener TTH-8 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 4,500 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTH-8 CNC lathe: 680 mm machining length, 528 mm turning diameter, 8 inch chuck, 4,500 rpm, 15/24.2 kW spindle motor, 650 mm swing.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 4,500 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~10 m/min |
| Swing Diameter | 650 mm (25.6 in) |
| Max Turning Diameter | 528 mm (20.8 in) |
| Max Turning Length | 680 mm (26.8 in) |
| Chuck Size | 8 inch (203 mm) |
| Max Spindle Speed | 4,500 rpm |
| Spindle Motor Power | 15/24.2 kW |
| Spindle Bore | 66 mm (2.6 in) |
| Bar Capacity | 52 mm (2 in) |
The price estimate for the Dener TTH-8 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-tth-8#price; the request is passed to Dener or an authorised dealer.
Swing diameter is 650 mm (25.6 in), maximum turning diameter 528 mm (20.8 in) and machining length 680 mm (26.8 in). The chuck is 8 inch (203 mm) and the bar capacity 52 mm (2 in).
The chuck, bore, bar capacity and 4,500 rpm speed are shared. The TTC-8 has a 560 mm (22 in) swing, a 305 mm (12 in) turning diameter and a 406 mm (16 in) machining length; the TTH-8 is larger in all three and lists more spindle motor power.
Dener prints the spindle motor power as 15/24.2 kW. The table gives the two values without saying which rating each one is, so the duty ratings should be confirmed with the supplier.
The option list on the page names a programmable tailstock. With 680 mm (26.8 in) of machining length, long parts will normally need tailstock support, so it should be specified in the order.
