Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak FJV-250 vs Mazak VCU-400A 5X.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Mazak
View Specs Page →
|
Mazak
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | 5-Axis Machining Centers |
| Controlled Axes | 3-Axis Simultaneous | 5-Axis Simultaneous |
| OEM Headquarters | Japan | Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 12,000 RPM | 12,000 RPM |
| Spindle Motor Rating | 15.0 kW (20.1 HP) More Power | 11.0 kW (14.8 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | N/A |
| Y-Axis Travel | N/A | N/A |
| Z-Axis Travel | N/A | N/A |
| Table Surface Dimensions | 47.24 in (1,200 mm) × 21.65 in (550 mm) | Standard Worktable |
| Maximum Table Payload | 2,645 kg | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 30 Tools | 30 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | MAZATROL SmoothG CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 18,739 kg Heaviest Base | 7,500 kg |
When evaluating Mazak FJV-250 vs Mazak VCU-400A 5X, shop managers must weigh spindle kinematics against overall structural rigidity. The Mazak FJV-250 delivers a competitive edge in heavier stock removal with its 15.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.