CNCBUY.NET
CNC Machinery Specification Benchmark

Mazak FJW-100/160 vs AWEA BL-2018FM

Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak FJW-100/160 vs AWEA BL-2018FM.

Configure Custom Machine Matchup
VS
Green badges indicate superior spec rating
Specification Matrix
Verified OEM & MachineSchema Data
Mazak FJW-100/160
Mazak
View Specs Page →
AWEA BL-2018FM
AWEA
View Specs Page →
1. Machine Classification & Kinematics
Machine Type CNC Vertical Machining Centers (VMC) CNC Vertical Machining Centers (VMC)
Controlled Axes 3-Axis Simultaneous 3-Axis Simultaneous
OEM Headquarters Japan International
Model Status / Year 2024 2024
2. Spindle Speed & Motor Power
Maximum Spindle Speed 6,000 RPM 6,000 RPM
Spindle Motor Rating 22.0 kW (29.5 HP) 22.0 kW (29.5 HP)
3. Work Envelope & Travels (X / Y / Z)
X-Axis Travel N/A 2,000 mm
Y-Axis Travel N/A 1,800 mm
Z-Axis Travel N/A 1,300 mm
Table Surface Dimensions 157.48 in (4,000 mm) × 78.74 in (2,000 mm) 1,600 x 1,800 mm (63.0 x 70.9 in)
Maximum Table Payload 48,501 kg Heaviest Load 15,000 kg
4. Tool Changer (ATC) & Motion Rates
Tool Magazine Capacity 50 Tools Largest ATC 40 Tools
Rapid Traverse Rate High-Speed Rapid Feed High-Speed Rapid Feed
5. CNC Control & Telemetry Standards
Standard CNC Controller Standard CNC Standard CNC
MTConnect Telemetry Standard ANSI/MTC1.4 Verified ANSI/MTC1.4 Verified
6. Machine Mass & Rigidity
Net Machine Weight 94,797 kg Heaviest Base 31,000 kg

Engineering Benchmark Summary & Buying Advice

When evaluating Mazak FJW-100/160 vs AWEA BL-2018FM, shop managers must weigh spindle kinematics against overall structural rigidity. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.

Popular CNC Machine Comparisons

High-volume industry matchups frequently analyzed by machine shops

Technical Evaluation Checklist: How to Compare CNC Machine Tools

When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:

1. Continuous vs. 30-Min Spindle Ratings

Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.

2. Cast-Iron Machine Mass (kg)

Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.

3. CNC Control Architecture & Telemetry

Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.