Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak VARIAXIS C-600 vs Mazak FJV-250.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Mazak
View Specs Page →
|
Mazak
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 5-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | Japan | Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 15,000 RPM Highest RPM | 12,000 RPM |
| Spindle Motor Rating | 30.0 kW (40.2 HP) More Power | 15.0 kW (20.1 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 650 mm | N/A |
| Y-Axis Travel | 550 mm | N/A |
| Z-Axis Travel | 530 mm | N/A |
| Table Surface Dimensions | 600 mm Tilting Table | 47.24 in (1,200 mm) × 21.65 in (550 mm) |
| Maximum Table Payload | 500 kg | 2,645 kg Heaviest Load |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 60 Tools Largest ATC | 30 Tools |
| Rapid Traverse Rate | 42 m/min | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | MAZATROL SmoothAi | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 9,500 kg | 18,739 kg Heaviest Base |
When evaluating Mazak VARIAXIS C-600 vs Mazak FJV-250, shop managers must weigh spindle kinematics against overall structural rigidity. The Mazak VARIAXIS C-600 delivers a competitive edge in heavier stock removal with its 30.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.