Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Nakamura-Tome WT-150II vs Hwacheon i2.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Nakamura-Tome
View Specs Page →
|
Hwacheon
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | Multi-Tasking & Mill-Turn Machines | Multi-Tasking & Mill-Turn Machines |
| Controlled Axes | 8-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | Japan | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 5,000 RPM | 5,000 RPM |
| Spindle Motor Rating | 15.0 kW (20.1 HP) | 22.0 kW (29.5 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 195 mm | 630 mm Longest X |
| Y-Axis Travel | 70 mm | 150 mm Longest Y |
| Z-Axis Travel | 600 mm | 1,165 mm Longest Z |
| Table Surface Dimensions | 6" / 8" Twin Opposed Chucks | Standard Worktable |
| Maximum Table Payload | 300 kg | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 48 Tools Largest ATC | 40 Tools |
| Rapid Traverse Rate | 40 m/min | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | NT-SmartX with Fanuc 31i-B | HARMONY |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 8,500 kg | 14,000 kg Heaviest Base |
When evaluating Nakamura-Tome WT-150II vs Hwacheon i2, shop managers must weigh spindle kinematics against overall structural rigidity. The Hwacheon i2 delivers a competitive edge in heavier stock removal with its 22.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.