Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak VARIAXIS j vs Hwacheon D2-5AX.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Mazak
View Specs Page →
|
Hwacheon
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | 5-Axis Machining Centers |
| Controlled Axes | 5-Axis Simultaneous | 5-Axis Simultaneous |
| OEM Headquarters | Japan | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 12,000 RPM | 12,000 RPM |
| Spindle Motor Rating | 7.5 kW (10.1 HP) | 37.0 kW (49.6 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 650 mm |
| Y-Axis Travel | N/A | 500 mm |
| Z-Axis Travel | N/A | 500 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 18 Tools | 30 Tools Largest ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | Fanuc 0i-MF Plus (optional Fanuc 31i-B5 Plus; HARMONY on either) |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 15,432 kg Heaviest Base | 11,500 kg |
When evaluating Mazak VARIAXIS j vs Hwacheon D2-5AX, shop managers must weigh spindle kinematics against overall structural rigidity. The Hwacheon D2-5AX delivers a competitive edge in heavier stock removal with its 37.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.