The AKS Cutting Systems PLASMATIC is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AKS PLASMATIC: plug-and-play CNC plasma table, 1.25 in (32 mm) max cut depth, 800 ipm (20.3 m/min), cuts up to 6 ft (1.83 m) wide.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AKS Cutting Systems (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Motion Accuracy | +/- 0.010 in per 3 ft of motion (+/- 0.25 mm per 914 mm) |
| Rapid Traverse | 800 ipm (20.3 m/min) |
| Max Cut Depth | 1.25 in (32 mm) |
| Max Cut Width | Up to 6 ft (1.83 m) |
| Max Cut Length | Up to 12 ft (3.66 m) |
| Table Sizes | 5×10 and 6×12 |
| Table Type | Water table or downdraft table |
| Operator Screen | 19 in (483 mm) touchscreen with keyboard and mouse |
| Drive System | X-axis and Y-axis helical rack and pinion drives |
| Torch Height Control | Servo driven ball screw lifter with arc voltage control (Hypertherm Sensor technology) |
| Water Tank Capacity | 210 gallons (795 L) maximum |
| Machine Electrical Connection | 120 VAC, 1-phase, 15 FLA, 60 Hz |
According to secondary market equipment benchmarks for November 2026, the AKS Cutting Systems PLASMATIC is estimated between $46,000 and $82,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $713 / month.
AKS lists a maximum cut depth of 1.25 in (32 mm). The cut envelope is up to 6 ft (1.83 m) wide and up to 12 ft (3.66 m) long. For thicker plate the tru-kut is listed with a 3 in (76 mm) maximum cut depth.
The floor plan for the standard layout shows an electrical connection of 120 VAC, 1-phase, 15 FLA at 60 Hz for the cutting machine. The plasma power supply has its own, larger supply, and the drawing tabulates separate requirements for each plasma unit, so the total depends on the plasma system ordered.
Either. AKS says the PLASMATIC features a water or downdraft table depending on what the operation needs. The floor plan gives a maximum tank water capacity of 210 gallons (795 L). A rust inhibitor additive and an air bubbler system are offered for water tables.
The PLASMATIC is slower and lighter. It is listed at 800 ipm (20.3 m/min) and a 1.25 in (32 mm) maximum cut depth with +/- 0.010 in per 3 ft motion accuracy. The tru-kut is listed at 1,200 ipm (30.5 m/min), 3 in (76 mm) and +/- 0.004 in per 3 ft.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.