The ANCA FX7 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the ANCA AMC5 G2 High Performance CNC, high-speed SSD, EtherCAT, Intel processor, Windows 10. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ANCA FX7 tool and cutter grinder: 19 kW (25.5 HP) peak, 8.2 kW S1, productive to Ø 12 mm, up to 6 wheel packs, loader for 840 x Ø 3 mm tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ANCA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | ANCA AMC5 G2 High Performance CNC, high-speed SSD, EtherCAT, Intel processor, Windows 10 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 19.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Machine Type | 5-axis CNC tool and cutter grinder (FX Linear range) |
| Machine Structure | Single column |
| Spindle Motor Power | 19 kW (25.5 HP) peak; 8.2 kW (11 HP) S1 |
| Wheel Packs | 2 x Ø 203 mm (8”) max; 6 x Ø 203 mm (8”) max with robot wheel changer |
| Tool Shank Diameter | Productive up to Ø 12 mm (1/2”) |
| Max Tool Length | 200 mm (8”) |
| Max Tool Capacity With Loader | 840 x Ø 3 mm; 520 x Ø 6 mm; 221 x Ø 12 mm (Fanuc loader) |
| Drive System | Linear motor |
| Machine Dimensions | 1,930 mm (76”) W x 1,800 mm (70”) D x 1,810 mm (71”) H |
| CNC Control | ANCA AMC5 G2 High Performance CNC, high-speed SSD, EtherCAT, Intel processor, Windows 10 |
| Axes | 6 CNC axes (X, Y, Z, A, B, C) |
| Collet Chuck Range | 3 – 25 mm |
| Control System | ANCA proprietary (Windows-based, 6-axis simultaneous) |
According to secondary market equipment benchmarks for November 2026, the ANCA FX7 is estimated between $48,000 and $85,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $744 / month.
The tool size is the same: both are listed as productive up to Ø 12 mm with a 200 mm tool length. The FX7 has a 19 kW (25.5 HP) peak spindle where the FX5 has 12 kW (16 HP) peak as standard. The FX7 lists up to 6 wheel packs with the robot wheel changer against 2 on the FX5, and its loader holds 840 x Ø 3 mm against 340 x Ø 3 mm on the FX5.
The spindle is rated 19 kW (25.5 HP) peak and 8.2 kW (11 HP) S1. S1 is the continuous rating, the power the spindle can hold without a time limit, and peak is what it can deliver for short periods. On long grinding passes the 8.2 kW figure is the one that governs the feed rate you can sustain.
Two wheel packs of up to Ø 203 mm (8”) as the base figure, or 6 packs of up to Ø 203 mm (8”) with the robot wheel changer. If the work needs more than two packs per setup, confirm that the robot wheel changer is on the machine being quoted.
The table gives a maximum tool length of 200 mm (8”) and calls the machine productive up to Ø 12 mm (1/2”). The collet chuck range is wider, 3 – 25 mm, so larger shanks can be clamped. For production above 12 mm the MX7 is the listed alternative, productive up to Ø 25 mm (1”).
The listed capacity is 840 tools at Ø 3 mm, 520 at Ø 6 mm or 221 at Ø 12 mm. Those figures belong to the loader named in the capacity row of the table, so check that the machine on offer has that loader fitted.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.