The ANCA TG7+ is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ANCA TG7+ thread grinder, listed figures: M1 to M80 threads, 80 mm x 350 mm workpieces, 11 kW spindle to 10,000 RPM, ±30° B-axis tilt.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ANCA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 3,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Axes | 6 CNC axes (X, Y, Z, A, B, C) with B-axis spindle tilt |
| Thread Range Metric | M1 – M80 |
| Thread Range Inch | No. 0 – 3 inch UNC/UNF/UNEF |
| Max Workpiece Diameter | 80 mm |
| Max Workpiece Length | 350 mm |
| Spindle Motor Power | 11 kW |
| Spindle Speed | Up to 10,000 RPM |
| B Axis Tilt Range | ±30° |
| Thread Lead Accuracy | ISO grade 4 achievable |
| Linear Axis Positioning Accuracy | ±0.001 mm |
| Repeatability | ±0.0005 mm |
| Control System | ANCA proprietary (Windows-based, 6-axis simultaneous) |
| Machine Weight | Approx. 3,500 kg |
| Coolant System | High-pressure coolant with paper-band filtration |
According to secondary market equipment benchmarks for November 2026, the ANCA TG7+ is estimated between $50,000 and $88,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $775 / month.
The listed thread range is M1 – M80 in metric and No. 0 – 3 inch in UNC, UNF and UNEF. Maximum workpiece diameter is 80 mm and maximum workpiece length is 350 mm, so the largest threads in the range take up the full diameter capacity.
The listed figures describe 6 CNC axes, X, Y, Z, A, B and C, with the B axis providing spindle tilt over a range of ±30°. Tilting the spindle sets the grinding wheel to the helix angle of the thread being ground. A thread with a helix angle beyond 30° cannot be matched by the tilt.
Listed linear axis positioning accuracy is ±0.001 mm and repeatability is ±0.0005 mm. Thread lead accuracy is given as ISO grade 4 achievable. On a machine that has seen service, ask for a recent calibration record and a ground test thread instead of relying on the nominal figures.
The spindle is listed at 11 kW with speeds up to 10,000 RPM. The coolant system is high-pressure with paper-band filtration. The machine weight is given as approximately 3,500 kg, which matters for the floor and for moving it.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.