The ANCA TX7 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ANCA TX7 linear motor tool grinder: productive to Ø 32 mm, 37 kW (49 HP) peak and 15 kW S1 spindle, optional RoboMate loader for up to 2520 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ANCA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Motor Rating | 37.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Axes | 5 (X, Y, Z linear + A, C rotary) |
| Spindle Motor Power | 37 kW (49 HP) peak / 15 kW (20.1 HP) S1 |
| Machine Structure | Bi-Symmetrical Gantry |
| Wheel Packs | 2 x Ø 203 mm (8”) max |
| Tool Diameter | Productive up to Ø 32 mm (1¼”) |
| Loader Type | RoboMate (option) |
| Max Tool Capacity | 2520 x Ø 3 mm / 1560 x Ø 6 mm / 462 x Ø 16 mm / 189 x Ø 25 mm / 105 x Ø 32 mm |
| Drive System | Linear Motor |
| Dimensions | 2561 mm (100.8”) W x 1500 mm (59”) D x 2272 mm (89.4”) H; with RoboMate 2643 mm (104”) W x 2260 (89") D |
| Cnc Details | ANCA AMC5, EtherCAT, high performance CNC, 8GB RAM, H/D 64GB SSD, Processor i7, Windows 8 |
| Machine Colours | RAL 7035 / RAL 5008 |
| Collet Chuck Range | 3 – 32 mm |
| Wheel Pack Changer | Up to 6 packs (automatic) |
| Axis Acceleration | Up to 1g (linear motor axes) |
| Control System | ANCA proprietary (Windows-based, 6-axis simultaneous) |
According to secondary market equipment benchmarks for November 2026, the ANCA TX7 is estimated between $58,000 and $103,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $899 / month.
The table lists the TX7 as productive up to Ø 32 mm (1¼”), and the collet chuck range is 3 – 32 mm. That is one step above the MX7, which is listed as productive up to Ø 25 mm (1”). The table for the TX7 does not state a maximum tool length.
Both use a bi-symmetrical gantry and linear motors. The TX7 goes to Ø 32 mm where the MX7 goes to Ø 25 mm (1”). On power the MX7 is slightly ahead: 38 kW (51 HP) peak and 20 kW (27 HP) S1 on the MX7, against 37 kW (49 HP) peak and 15 kW (20.1 HP) S1 on the TX7. The MX7 is also listed with a second loader option, FastLoad-MX, that the TX7 row does not show.
RoboMate is an option. Listed capacity is 2520 x Ø 3 mm, 1560 x Ø 6 mm, 462 x Ø 16 mm, 189 x Ø 25 mm or 105 x Ø 32 mm. Capacity drops as the shank grows, but even at the machine's largest diameter one load is 105 tools.
According to secondary market equipment benchmarks for November 2026, the ANCA TX7 is estimated between $58,000 and $103,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $899 / month.
The control row reads ANCA AMC5, EtherCAT, high performance CNC, 8GB RAM, 64GB SSD, i7 processor and Windows 8. The MX7 row lists the AMC5 G2 with Windows 10, so confirm which control generation and operating system a particular TX7 is supplied with.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.