The ATLIX xBUILD 1000 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ATLIX xBUILD 1000: Ø 100 x H 100 mm build volume, 200 W TRUMPF fiber laser (optional 2 x 200 W), 230 V supply, 900 kg. Checked against ATLIX.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ATLIX (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Build Volume | Ø 100 x H 100 mm (Ø 3.9 x 3.9 in); effective build area Ø 98 mm (3.9 in) |
| Build Rate | 10 - 50 cm³/h (0.6 - 3.1 in³/h) |
| Layer Thickness | 20 - 60 μm |
| Laser Power | 200 W (optional multilaser: 2 x 200 W) |
| Number Of Lasers | 1 (optional 2) |
| Beam Diameter | 80 μm (optional: 55/80 μm) |
| Oxygen Concentration | Down to 3,000 ppm (0.3%); optional down to 100 ppm (0.01%) |
| Scan Speed | Max. 2 m/s (79 in/s) |
| Shielding Gas | Nitrogen, Argon |
| Power Supply | 230 V - 30 A - 50/60 Hz |
| Machine Dimensions | 780 x 2,050 x 1,160 mm (30.7 x 80.7 x 45.7 in) |
| Machine Weight | 900 kg (1,984 lb) incl. powder |
According to secondary market equipment benchmarks for November 2026, the ATLIX xBUILD 1000 is estimated between $52,000 and $91,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $806 / month.
The build volume is cylindrical: Ø 100 x H 100 mm (Ø 3.9 x 3.9 in). ATLIX gives the effective build area as Ø 98 mm (3.9 in), so use that figure, not the nominal diameter, when checking whether a part or a nest fits.
Yes. The standard machine has one 200 W TRUMPF fiber laser, and a multilaser version with 2 x 200 W is listed as an option. The number of lasers is given as 1, optional 2.
Oxygen concentration is listed as down to 3,000 ppm (0.3%) as standard, with down to 100 ppm (0.01%) as an option. Shielding gas is Nitrogen or Argon. Specify the lower level at order if the alloys you run need it.
A 230 V - 30 A - 50/60 Hz power supply and a Nitrogen or Argon shielding gas source. The machine measures 780 x 2,050 x 1,160 mm (30.7 x 80.7 x 45.7 in) and weighs 900 kg (1,984 lb) including powder.
The xBUILD 2000 has a 202 x 202 x 200 mm (8.0 x 8.0 x 7.9 in) build volume, 300 / 500 W laser power and a weight of 2,500 kg (5,512 lb). The xBUILD 1000 has a Ø 100 x H 100 mm volume, a 200 W laser and weighs 900 kg (1,984 lb) incl. powder.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.