The ATLIX xBUILD 2000 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ATLIX xBUILD 2000: 202 x 202 x 200 mm build volume, 300 / 500 W TRUMPF fiber laser, optional second laser, inert unpacking. Checked against ATLIX.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ATLIX (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 2,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Build Volume | 202 x 202 x 200 mm (8.0 x 8.0 x 7.9 in) |
| Build Rate | 30 - 130 cm³/h (1.8 - 7.9 in³/h) |
| Layer Thickness | 20 - 100 μm |
| Laser Power | 300 / 500 W (optional multilaser: 2 x 300 / 2 x 500 W) |
| Number Of Lasers | 1 (optional 2) |
| Beam Diameter | 80 μm (optional: 55 μm) |
| Oxygen Concentration | Down to 3,000 ppm (0.3%) |
| Scan Speed | Max. 3 m/s (118 in/s) |
| Preheating | Up to 200 °C (392 °F) |
| Unpacking | Inert, in the machine, integrated powder conveyor |
| Shielding Gas | Nitrogen, Argon |
| Power Supply | 400/460 V | 32 A | 50/60 Hz |
| Machine Dimensions | 2,180 x 2,030 x 1,400 mm (85.8 x 79.9 x 55.1 in) |
| Machine Weight | 2,500 kg (5,512 lb) |
According to secondary market equipment benchmarks for November 2026, the ATLIX xBUILD 2000 is estimated between $48,500 and $86,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $752 / month.
The TRUMPF fiber laser is listed at 300 / 500 W. An optional multilaser version doubles that to 2 x 300 / 2 x 500 W, and the number of lasers is given as 1, optional 2. Beam diameter is 80 μm, with 55 μm optional.
ATLIX lists unpacking as inert, in the machine, with an integrated powder conveyor. The job is depowdered inside the machine under shielding gas instead of at a separate station, which matters for reactive powders and for operator exposure.
Build rate is listed as 30 - 130 cm³/h (1.8 - 7.9 in³/h). The layer thickness range is 20 - 100 μm and the scan speed is max. 3 m/s (118 in/s). Where a job falls in that range depends on the laser configuration, the layer and the material.
The table lists preheating up to 200 °C (392 °F). Oxygen concentration is listed down to 3,000 ppm (0.3%) and the shielding gas is Nitrogen or Argon. No lower oxygen option is listed for this model.
The power supply is 400/460 V | 32 A | 50/60 Hz. Machine dimensions are 2,180 x 2,030 x 1,400 mm (85.8 x 79.9 x 55.1 in) and the weight is 2,500 kg (5,512 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.