The AWEA AH-630 is an industrial-grade CNC Horizontal Machining Centers (HMC) powered by the FANUC Oi-MD. It offers working travels of 1020 x 900 x 900 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA AH-630 HMC: 630 mm pallet, 1,200 kg load, 1,020 x 900 x 900 mm travels, BBT50 10,000 rpm spindle 22 / 26 kW, 60 tools, 16,500 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Horizontal Machining Centers (HMC) |
| CNC Controller System | FANUC Oi-MD |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 1,020 mm |
| Y-Axis Travel | 900 mm |
| Z-Axis Travel | 900 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 630 x 630 mm (24.8 x 24.8 in) |
| Max Table Load Capacity | 1,200 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 16,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 1,020 mm (40.2 in) |
| Y Axis Travel | 900 mm (35.4 in) |
| Z Axis Travel | 900 mm (35.4 in) |
| Table Size | 630 x 630 mm (24.8 x 24.8 in) |
| Max Table Load | 1,200 kg (2,646 lb) |
| Distance Spindle Center To Table Top | 50 ~ 950 mm (2.0 ~ 37.4 in) |
| Distance Spindle Nose To Table Center | 200 ~ 1,100 mm (7.9 ~ 43.3 in) |
| B Axis Min Index | 0.001° |
| Max Workpiece Diameter Height | Ø1,020 / 1,000 mm (Ø40.2 / 39.4 in) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Direct Drive 10,000 rpm |
| Spindle Taper | BBT50 |
| Rapid Traverse X | 48 m/min (1,890 ipm) |
| Rapid Traverse Y | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 48 m/min (1,890 ipm) |
| Rapid Traverse B | 11.1 rpm |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 60 T |
| Max Tool Length | 500 mm (19.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Max Tool Diameter | Ø115 / Ø230 mm (Ø4.5 / Ø9.1 in) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.010 mm / Full travel |
| Repeatability Vdi 3441 | Ps ≤ 0.008 mm |
| CNC Control | FANUC Oi-MD |
| Air Pressure Requirement | 6 kg/cm² |
| Machine Dimensions | 5,325 x 3,485 x 3,755 mm (209.6 x 137.2 x 147.8 in) |
| Machine Weight | 16,500 kg (36,376 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA AH-630 is estimated between $111,000 and $224,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,721 / month.
The table is 630 x 630 mm (24.8 x 24.8 in) and holds 1,200 kg (2,646 lb). The maximum workpiece is Ø1,020 / 1,000 mm (Ø40.2 / 39.4 in), diameter and height. AWEA states a pallet change time of 16 seconds for the series.
X is 1,020 mm (40.2 in), Y is 900 mm (35.4 in) and Z is 900 mm (35.4 in). The spindle center ranges 50 ~ 950 mm (2.0 ~ 37.4 in) above the table top, and the spindle nose 200 ~ 1,100 mm (7.9 ~ 43.3 in) from the table center.
AWEA says the AH series can be equipped with a 10,000 rpm direct drive spindle or a 705 N-m gear spindle. The gear spindle runs to 6,000 rpm with a 26 kW motor and delivers its maximum torque at 352 rpm. The specification table itself lists the direct drive version.
The table lists a minimum index of 0.001°, achieved with a two-piece worm gear mechanism and a full circumference hydraulic brake. AWEA also describes a 1° clutch indexing table with a positioning accuracy of 8" and repeatability of 2", intended for heavy table loads.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.