The AWEA BL-4018FM is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4000 x 1800 x 1300 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA BL-4018FM: 4,000 mm X ram-type horizontal boring mill with 1,800 mm Y, 6,000 rpm BT50 built-in spindle, 600 mm W axis and 40T magazine.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 1,800 mm |
| Z-Axis Travel | 1,300 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 |
| Table / Platter / Chuck Size | 1,600 x 1,800 mm (63.0 x 70.9 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 39,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 1,800 mm (70.9 in) |
| Z Axis Travel | 1,300 mm (51.2 in) |
| W Axis Travel | 600 mm (23.6 in) |
| Table Size | 1,600 x 1,800 mm (63.0 x 70.9 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose To Table | 885 mm (34.8 in) |
| Boring Spindle Size | Ram 480 x 470 mm section |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Torque | 600 Nm (443 lb-ft) |
| Spindle Taper | BT50 |
| Rapid Traverse Xyz | 12,000 mm/min (472 ipm) |
| Rapid Traverse W | 5,000 mm/min (197 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 40T |
| Max Tool Diameter | Ø125 / Ø250 mm (Ø4.9 / Ø9.8 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 25 kg (55 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.01 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P= 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps= 0.018 mm |
| Power Requirement | 70 kVA, 220 / 380~415 ±10%, 3 phase, 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Lubrication Tank Capacity | 4.6 liter |
| Coolant Tank Capacity | 560 liter |
| Machine Weight | 39,000 kg (85,979 lb) |
| Machine Height | 4,515 mm (177.8 in) |
According to secondary market equipment benchmarks for November 2026, the AWEA BL-4018FM is estimated between $81,500 and $145,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,263 / month.
Under VDI, yes: P= 0.025 mm positioning and Ps= 0.018 mm repeatability, against P= 0.016 mm and Ps= 0.012 mm on the BL-2018FM. Under JIS the stated values are identical for all lengths, ± 0.01 mm over full travel and ± 0.003 mm.
39,000 kg (85,979 lb). That is heavier than the quill-type BL-4018S at 38,000 kg (83,774 lb) and lighter than the taller BL-4024FM at 40,500 kg (89,286 lb). Machine height is 4,515 mm (177.8 in).
No. The table gives 12,000 mm/min (472 ipm) for X, Y and Z on every BL model, and 5,000 mm/min (197 ipm) for W. AWEA describes ball screws driven directly by FANUC αi series motors on 3 axes.
The foundation for a 39,000 kg (85,979 lb) machine, a 70 kVA supply, air at 5 ~ 8 (5) kg/cm², and headroom for 4,515 mm (177.8 in). Also confirm the table rating: the specification table shows 15,000 kg (33,069 lb), while the feature page states 12,000 kg with 15,000 kg as an option.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.