The AWEA FM-87 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 800 x 700 x 420 mm, a top spindle speed of 20,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA FM-87 bridge-type mold machine: 800 x 700 x 420 mm travels, built-in 20,000 rpm BT40 spindle, 30 m/min rapids, 800 kg table load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 800 mm |
| Y-Axis Travel | 700 mm |
| Z-Axis Travel | 420 mm |
| Maximum Spindle Speed | 20,000 RPM |
| Spindle Motor Rating | 15.0 kW |
| Spindle Taper Interface | BT40 |
| Table / Platter / Chuck Size | 850 x 700 mm (33.5 x 27.6 in) |
| Max Table Load Capacity | 800 kg |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Approx. Machine Weight | 7,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 800 mm (31.5 in) |
| Y Axis Travel | 700 mm (27.6 in) |
| Z Axis Travel | 420 mm (16.5 in) |
| Table Size | 850 x 700 mm (33.5 x 27.6 in) |
| Max Table Load | 800 kg (1,764 lb) |
| Distance Spindle Nose To Table | 150 ~ 570 mm (5.9 ~ 22.4 in) |
| T Slots | 18 mm x 125 mm x 5 |
| Spindle Taper | BT40 |
| Max Spindle Speed | Built-in 20,000 rpm |
| Spindle Motor Power | 15 / 18.5 kW (20.1 / 24.8 hp) |
| Spindle Lubrication | Oil-Air |
| Rapid Traverse Xyz | 30 m/min (1,181 ipm) |
| Cutting Feed Rate | 24 m/min (945 ipm) |
| Tool Capacity | Umbrella Type 20T |
| Max Tool Length | 220 mm (8.7 in) |
| Max Tool Weight | 7 kg (15 lb) |
| Max Tool Diameter | Ø35 mm (Ø1.4 in) |
| Positioning Accuracy Vdi 3441 | 0.008 mm |
| Repeatability Vdi 3441 | 0.004 mm |
| Air Pressure Requirement | 6 kg/cm² |
| Power Requirement | 40 KVA |
| Coolant Tank Capacity | 359 L |
| Machine Weight | 7,000 kg (15,432 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA FM-87 is estimated between $61,000 and $109,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $946 / month.
It is a bridge-type machine in a vertical machining center's size class. AWEA describes a solid bridge-type structure, and the travels are 800 x 700 x 420 mm, with a Y stroke far longer than a C-frame machine of this X travel usually has. The AF-800II, for comparison, has 510 mm (20.1 in) of Y on the same 800 mm (31.5 in) of X.
A built-in 20,000 rpm spindle with a BT40 taper, oil-air lubrication and a 15 / 18.5 kW (20.1 / 24.8 hp) motor. AWEA says its sample machine carries the MIRL-Neo built-in high speed spindle developed by ITRI, Taiwan. The maker's inspection of each high speed spindle covers dynamic balance, vibration, noise, temperature rise, thermal variation and run-out.
Only with small tools. The magazine accepts nothing over Ø35 mm (Ø1.4 in) in diameter or 7 kg (15 lb) in weight, so large face mills and indexable roughers cannot be loaded. The machine suits semi-finishing and finishing at high spindle speed and feeds up to 24 m/min (945 ipm); heavy stock removal belongs on another machine.
AWEA states that the series is equipped with a FANUC controller and the software of its Optimal Parameter System. The sample machine shown by the maker has a FANUC Oi-MD controller. The specification table itself has no control row, so confirm the exact control model when ordering.
The table lists a 40 KVA power requirement, compressed air at 6 kg/cm² and a coolant tank of 359 L. The machine weighs 7,000 kg (15,432 lb). The clearance from spindle nose to table runs from 150 ~ 570 mm (5.9 ~ 22.4 in), which together with the 220 mm (8.7 in) tool length limit sets how tall a mold block can be.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.