The AWEA HTP-4025 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4000 x 2500 x 1000 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA HTP-4025 bridge machining center: 4,000 x 2,500 x 1,000 mm travels, 15,000 kg table load, 4,000 rpm BBT50 gear spindle, 15 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 2,500 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (ISO 50) |
| Table / Platter / Chuck Size | 4,020 x 2,400 mm (158.3 x 94.5 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 41,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 2,500 mm (98.4 in) (Opt. 3,200) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400) |
| Table Size | 4,020 x 2,400 mm (158.3 x 94.5 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) (Opt. 200 ~ 1,400 / 200 ~ 1,600) |
| Spindle Taper | BBT50 (ISO 50) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) (Opt. 30 / 37) |
| Max Spindle Speed | Gear Spindle 4,000 rpm |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Yz | 12 m/min (472 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 T (Opt. 40 / 60 / 90 / 120) |
| Max Tool Length | 350 mm (13.8 in) (Opt. 400) |
| Max Tool Weight | 20 kg (44 lb) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.025 mm |
| Coolant Tank Capacity | 900 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 41,000 kg (90,388 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA HTP-4025 is estimated between $83,500 and $148,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,294 / month.
Both have 4,000 mm (157.5 in) of X, 2,500 mm (98.4 in) of Y, a 4,020 x 2,400 mm (158.3 x 94.5 in) table and a 15,000 kg (33,069 lb) table load. The LP-4025 lists 760 mm (29.9 in) of Z and weighs 40,000 kg (88,183 lb). The HTP-4025 lists 1,000 mm (39.4 in) of Z with a 4,000 rpm gear spindle and weighs 41,000 kg (90,388 lb).
A gear spindle running to 4,000 rpm with a BBT50 (ISO 50) taper and a 22 / 26 kW (29.5 / 34.9 hp) motor; the table also prints a 30 / 37 option. AWEA says the gear head uses a short, highly rigid transmission shaft meant for heavy cutting.
AWEA gives two sets of figures. Under JIS, positioning is ± 0.015 mm over full travel and repeatability is ± 0.003 mm. Under VDI, P ≤ 0.030 mm over full travel and Ps ≤ 0.025 mm. Feedback is a semi-closed loop system with encoders connected directly to the ball screws.
The specification table shows Y travel of 2,500 mm (98.4 in) with the note "Opt. 3,200" and Z travel of 1,000 mm (39.4 in) with "Opt. 1,200 / 1,400". The spindle nose to table distance is 200 ~ 1,200 mm (7.9 ~ 47.2 in) in the standard form.
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.