The AWEA HTP-7033 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 7000 x 3300 x 1000 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA HTP-7033: 7,000 x 3,300 x 1,000 mm bridge machining center, 7,020 x 3,000 mm table, 20,000 kg load, 61,000 kg weight, 7.5 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 7,000 mm |
| Y-Axis Travel | 3,300 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (ISO 50) |
| Table / Platter / Chuck Size | 7,020 x 3,000 mm (276.4 x 118.1 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 61,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 7,000 mm (275.6 in) |
| Y Axis Travel | 3,300 mm (129.9 in) (Opt. 4,000) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400) |
| Table Size | 7,020 x 3,000 mm (276.4 x 118.1 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) (Opt. 200 ~ 1,400 / 200 ~ 1,600) |
| Spindle Taper | BBT50 (ISO 50) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) (Opt. 30 / 37) |
| Max Spindle Speed | Gear Spindle 4,000 rpm |
| Rapid Traverse X | 7.5 m/min (295 ipm) |
| Rapid Traverse Yz | 12 m/min (472 ipm) |
| Cutting Feed Rate | 1 ~ 5 m/min (39 ~ 197 ipm) |
| Tool Capacity | 32 T (Opt. 40 / 60 / 90 / 120) |
| Max Tool Length | 350 mm (13.8 in) (Opt. 400) |
| Max Tool Weight | 20 kg (44 lb) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Coolant Tank Capacity | 1,050 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 61,000 kg (134,480 lb) |
According to secondary market equipment benchmarks for November 2026, the AWEA HTP-7033 is estimated between $84,000 and $149,000 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $1,302 / month.
61,000 kg (134,480 lb), before a workpiece of up to 20,000 kg (44,092 lb). Foundation design, crane capacity and transport sections should be settled with AWEA before the order, because this is a clear step above the 51,000 kg (112,434 lb) HTP-6033.
X rapid traverse is 7.5 m/min (295 ipm). Y and Z rapids are 12 m/min (472 ipm). Cutting feed is 1 ~ 5 m/min (39 ~ 197 ipm). The HTP-7041 has the same X figure but 10 m/min (394 ipm) on Y and Z.
On paper. AWEA's table prints P ≤ 0.040 mm over full travel and Ps ≤ 0.030 mm for the HTP-7033, and P ≤ 0.050 mm and Ps ≤ 0.035 mm for the HTP-6033, both under VDI. The JIS rows are the same for the two: ± 0.015 mm and ± 0.003 mm. The feature pages give no reason, so ask the maker.
Both have 7,000 mm (275.6 in) of X and 3,300 mm (129.9 in) of Y. The LP-7033 lists a 7,020 x 2,400 mm (276.4 x 94.5 in) table, 760 mm (29.9 in) of Z and 66,000 kg (145,503 lb). The HTP-7033 lists a 7,020 x 3,000 mm (276.4 x 118.1 in) table, 1,000 mm (39.4 in) of Z and 61,000 kg (134,480 lb).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.