The AWEA HVM-7033Y is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 7000 x 4500 x 1000 mm, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA HVM-7033Y: five-face bridge machining center with 7,000 x 4,500 x 1,000 mm travels, 20,000 kg table load, BT 50 spindle and 60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 7,000 mm |
| Y-Axis Travel | 4,500 mm |
| Z-Axis Travel | 1,000 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 (7 / 24) |
| Table / Platter / Chuck Size | 6,020 x 2,400 mm (237.0" x 94.5") |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 7,000 mm (275.6") |
| Y Axis Travel | 4,500 mm (177.2") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 6,020 x 2,400 mm (237.0" x 94.5") |
| Max Table Load | 20,000 kg (44,000 lb) |
| Distance Between Columns | 3,300 mm (129.9") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 7,500 mm/min (295.2 IPM) |
| Rapid Traverse Yz | 10,000 / 10,000 mm/min (393.7 / 393.7 IPM) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 15,585 mm (613") |
| Machine Width | 8,150 mm (321") |
| Machine Height | 5,600 mm (220") |
According to secondary market equipment benchmarks for November 2026, the AWEA HVM-7033Y is estimated between $157,500 and $314,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,441 / month.
That is what AWEA's specification page shows: 7,000 mm (275.6 in) of X travel and a 6,020 x 2,400 mm (237.0 x 94.5 in) table. The HVM-6033Y has the same table with 6,000 mm (236.2 in) of X travel. The page offers no explanation, so ask AWEA for the table length before planning a fixture.
X travel is 7,000 mm (275.6 in) where the HVM-6033Y has 6,000 mm (236.2 in), and X rapid is 7,500 mm/min (295.2 IPM) where the HVM-6033Y has 10,000 mm/min (394 ipm). Length grows to 15,585 mm (613 in) from the 14,875 mm (585 in) of the HVM-6033Y. Y and Z travel, column spacing, table load, spindle and magazine are listed identically.
The spec table on this page does not carry a weight for the HVM-7033Y. The shorter HVM-6033Y is listed at 59,000 kg (129,800 lb), which gives the order of size. Get the figure from AWEA for foundation and transport planning.
A BT 50 (7 / 24) spindle with a 22 / 26 kW (30 / 35 HP) motor. Standard distance from spindle nose to table is 200 ~ 1,200 mm (7.9 ~ 47.2 in); 400 ~ 1,400 mm (15.7 ~ 55.1 in) is optional. Maximum tool diameter is 127 / 240 mm (5.0 / 9.4 in).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.