The AWEA LG-10030 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 3000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10030 gantry 5-face machining center: 10,000 x 3,000 x 1,000 mm travels, 10,000 x 2,800 mm fixed table at 2,500 kg/m², 20 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 3,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 2,800 mm (393.7 x 110.2 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 3,000 mm (118.1 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 2,800 mm (393.7 x 110.2 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 3,800 mm (3,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy X Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.020 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,300 liter |
According to secondary market equipment benchmarks for November 2026, the AWEA LG-10030 is estimated between $157,500 and $314,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,441 / month.
According to secondary market equipment benchmarks for November 2026, the AWEA LG-10030 is estimated between $157,500 and $314,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,441 / month.
Width. The LG-10040 has 4,000 mm (157.5 in) of Y, a 10,000 x 3,800 mm (393.7 x 149.6 in) table and a 1,600 liter coolant tank, and its Y and Z positioning is P = 0.030 mm. The LG-10030 has 3,000 mm (118.1 in) of Y, a 2,800 mm wide table, 1,300 liter of coolant and P = 0.025 mm on Y and Z. X travel, X rapid and X accuracy are the same.
The rating is 2,500 kg/m², and because the table is fixed the load does not affect axis motion. AWEA describes a double layer structure that can endure super heavy work-pieces without deformation and a floor type design that attaches the table firmly to the base to damp vibration.
For X travels of 6 m and above AWEA uses its patented zero backlash rack & pinion combined with a high resolution linear scale, and the X-axis runs under AWEA's synchronous servo control. The listed rapid is 20 m/min (787 ipm).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.