The AWEA LG-10040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 4000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10040: 10,000 x 4,000 x 1,000 mm gantry type 5-face machining center, 10,000 x 3,800 mm fixed table, 20 m/min X rapid, CAT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 4,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 3,800 mm (393.7 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 4,000 mm (157.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 3,800 mm (393.7 x 149.6 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 4,800 mm (4,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.025 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,600 liter |
According to secondary market equipment benchmarks for November 2026, the AWEA LG-10040 is estimated between $155,000 and $310,500 USD depending on machine hours, spindle condition, and tooling package. Financing and industrial lease options typically start around $2,403 / month.
Four: the LG-10030 with 3,000 mm (118.1 in) of Y, the LG-10040 with 4,000 mm (157.5 in), the LG-10050 with 5,000 mm (196.9 in) and the LG-10070 with 7,000 mm (275.6 in). All four are listed with an X rapid of 20 m/min (787 ipm), X positioning of P = 0.050 mm and repeatability of Ps = 0.038 mm.
When 3,800 mm of table width is enough. The LG-10040 moves across Y at 15 m/min (591 ipm) and holds P = 0.030 mm on Y and Z. The LG-10050, with a 10,000 x 4,800 mm (393.7 x 189.0 in) table, is listed at 12 m/min (472 ipm) and P = 0.040 mm. The LG-10050 carries 1,900 liter of coolant against 1,600 liter here.
AWEA fits two rotating chip augers on both sides of the working table, feeding a separate type coolant tank that the specification lists at 1,600 liter. Because the table is fixed, chips are not carried about by a moving table; they have to be washed or swept to the augers at the table edges.
The LG-6040 and LG-8040 use the same rack and pinion X drive, the same spindle range and the same 4,800 mm between columns. AWEA says the working table and side columns are modular and that X travel could be extended on that basis. The LG-5040 is the exception in this width, with a ball screw X axis at 10 m/min (394 ipm).
Peer engineering insights, spindle reliability feedback, and real-world shop floor experiences.